Cache.Deals

Cheap TIG Welder

markserbu
Published on August 14, 2022
Category: Gunsmithing & DIY
Duration: 32:10

This video provides an in-depth review and comparison of a budget TIG welder (Yes Welder) against a professional-grade machine (Miller Syncrowave 200). The presenter, a gun designer with 25 years of welding experience, details the unboxing, setup, and performance of the Yes Welder, highlighting its limitations such as a non-variable pedal and lack of pre/post-flow. He demonstrates various welding techniques on different materials, comparing the results to the Miller, and offers insights into essential TIG welding features.

Tags

TIG Welder
Yes Welder
Miller Syncrowave 200
Welding
Metal Fabrication
Gunsmithing
DIY Projects
Welding Equipment
Inverter Welder
Arc Welding
Welding Techniques
Hobbyist Welder

Quick Summary

Essential TIG welding features for gunsmithing include a high-frequency start for easy arc initiation and an adjustable power pedal for precise amperage control. While budget welders like the Yes Welder can perform basic tasks, professional machines like the Miller Syncrowave 200 offer superior control and features like pre/post-flow gas and pulsing for cleaner, more consistent welds.

Chapters

  1. 00:10Introduction & Welding Experience
  2. 01:00Unboxing the Yes Welder
  3. 01:53Yes Welder Components & Adapters
  4. 02:15Pedal and Stinger Analysis
  5. 02:58Ground Clamp and Graphics
  6. 03:45All Accessories Overview
  7. 04:09Missing Accessories: Regulator, Gas, Tungsten
  8. 04:45Gas Regulator Setup
  9. 05:06Pedal Conductor Issue
  10. 05:30Amperage Limitations & Advertising
  11. 05:54Initial Welding Attempt & Failure
  12. 06:14Switching to High Frequency Start
  13. 06:35Tacking with Yes Welder
  14. 06:58Filling a Bead with Yes Welder
  15. 08:48Comparison: Yes Welder vs. Miller
  16. 09:11Miller Syncrowave 200 Introduction
  17. 09:33Welding with Miller Syncrowave 200
  18. 10:15Miller Weld Quality Assessment
  19. 10:36Tungsten Adjustment
  20. 10:45Side-by-Side Comparison: Fusing
  21. 11:36Side-by-Side Comparison: Adding Filler
  22. 12:12Close Look at Filler Weld
  23. 13:05Welding with Miller's Pulser
  24. 13:50Pulser Weld Results
  25. 14:25Melting in Pulser Weld
  26. 14:55Post-Flow Benefits
  27. 15:25Back to Yes Welder: Loud Fan Noise
  28. 15:32Fusing with Yes Welder (87 Amps)
  29. 16:02Laying a Bead with Yes Welder (87 Amps)
  30. 16:29Adjusting Amperage on Yes Welder (50 Amps)
  31. 17:29Adjusting Amperage on Yes Welder (25 Amps)
  32. 18:03Adjusting Amperage on Yes Welder (35 Amps)
  33. 18:36Welding with Yes Welder (35 Amps)
  34. 19:18Gas Flow Adjustment
  35. 20:19Adjusting Amperage on Yes Welder (40 Amps)
  36. 20:52Final Yes Welder Weld Assessment
  37. 21:07Back to Miller Syncrowave 200
  38. 21:36Miller Welder Features: Post-Flow, Pre-Flow
  39. 21:53Welding with Miller (Standard)
  40. 22:19Miller Weld Surface Assessment
  41. 22:55Fusing with Miller
  42. 23:09Fusing with Miller's Pulser
  43. 24:16Miller Weld Quality Reflection
  44. 24:43Thin Sheet Metal Test: Yes Welder
  45. 25:30TIG Tack Welding Benefits
  46. 26:27Pedal Limitation on Yes Welder for Tacking
  47. 27:09Bead Down Seam: Yes Welder
  48. 27:33Welding Seam with Yes Welder
  49. 28:03Beautiful Weld Result (Yes Welder)
  50. 29:17Uzi Challenge Passed
  51. 29:44TIG Must-Haves Recap
  52. 30:20TIG Nice-to-Have Features
  53. 30:32Pulser Feature Discussion
  54. 30:55Conclusion & Patreon Giveaway

Frequently Asked Questions

What are the essential features to look for in a TIG welder for gunsmithing or fabrication?

For TIG welding, especially for gunsmithing or fabrication, a high-frequency start is crucial for easy arc initiation without contaminating the tungsten. An adjustable power pedal is also vital, allowing precise control over amperage to manage heat input on various materials and thicknesses.

How does a budget TIG welder like the Yes Welder compare to a professional machine like the Miller Syncrowave 200?

Budget welders like the Yes Welder often lack advanced features such as adjustable pedals, pre-flow, and post-flow gas, making them harder to control. Professional machines like the Miller Syncrowave 200 offer superior precision, cleaner welds, and more features like pulsing, which significantly aids in weld quality and consistency.

What are the benefits of pre-flow and post-flow gas in TIG welding?

Pre-flow gas in TIG welding purges the weld area with shielding gas before the arc starts, preventing oxidation. Post-flow gas continues to protect the molten puddle as it cools, minimizing oxidation and ensuring a cleaner, stronger weld bead. These features are often found on higher-end machines.

Can a budget TIG welder be used for welding thin sheet metal, such as for firearm components?

While a budget TIG welder can weld thin sheet metal, it's significantly more challenging due to the lack of fine amperage control from a non-variable pedal. Achieving clean, precise welds requires more skill and careful heat management compared to using a machine with an adjustable pedal and advanced features.

Related Articles

All Articles →
The Rifle America Keeps Banning: 50 Years of AK-47 Import Restrictions
Explainer20 min read

The Rifle America Keeps Banning: 50 Years of AK-47 Import Restrictions

Canik MC9 Prime: Complete Guide
Gear Deep Dive18 min read

Canik MC9 Prime: Complete Guide

More from markserbu

View all →
Lathe Machine Gun
Lathe Machine Gun

This guide details the complex process of converting a lathe into a 12-barrel blank-firing gun, as demonstrated by Mark Serbu. It highlights the critical engineering challenges, including precise alignment, CNC control, and the application of PID theory to overcome firing inconsistencies. The project emphasizes safety and legal considerations, focusing on blank ammunition to avoid machine gun manufacturing regulations.

Lathe Gun
12-Barrel
Channel:markserbu
Category:Gunsmithing & DIY
Date: Jul 14, 2021
Duration: 7:07
Home Shop Rifling!
Home Shop Rifling!

This video demonstrates how to rifle a barrel in a home shop using basic tools, bypassing expensive CNC equipment. It covers material preparation, precise drilling and reaming, and the critical process of pushing a rifling button. While a DIY approach is shown to be possible, the video highlights the significant difference in quality and precision achievable with professional CNC machining.

Rifle
Gunsmithing
Channel:markserbu
Category:Gunsmithing & DIY
Date: Sep 15, 2017
Duration: 24:56
Kentucky Ballistics' RN-50 Blow-up: First Look
Kentucky Ballistics' RN-50 Blow-up: First Look

This video provides an expert-level analysis of a catastrophic failure of the Serbu RN-50 rifle, presented by the firearm's designer, Mark Serbu. The examination focuses on the severe damage to the receiver, breech cap, and barrel assembly, offering insights into potential failure points and the effects of extreme forces. The analysis also touches upon the ammunition used, specifically SLAP rounds, and their potential role in the incident.

Serbu Firearms
RN-50
Channel:markserbu
Category:Gunsmithing & DIY
Date: Jun 12, 2021
Duration: 5:20
RN-50 Blow-Up
RN-50 Blow-Up

Mark Serbu, a gun designer, addresses the RN-50 blow-up incident involving Scott from Kentucky Ballistics. Serbu reassures customers that the RN-50 is a safe design, attributing the incident to a counterfeit and faulty ammunition round. He emphasizes the importance of sourcing ammunition carefully and highlights the rifle's extensive safe operational history.

RN-50
Mark Serbu
Channel:markserbu
Category:General
Date: May 1, 2021
Duration: 6:45
Find an FFL
Licensed dealers in your area