Cleaning Your Taurus G3, G3C, G2, G2C New Owners Guide

Published on February 28, 2021
Duration: 14:57

This guide provides a comprehensive walkthrough for cleaning and maintaining Taurus G3, G3C, G2, and G2C pistols. It details the recommended cleaning schedule, essential supplies, and step-by-step disassembly, cleaning, lubrication, and reassembly procedures. Emphasis is placed on safety checks and proper lubrication points to ensure firearm reliability for self-defense and concealed carry.

Quick Summary

Clean your Taurus G3, G3C, G2, or G2C pistol every 200 rounds. Start with a safety check, field strip the firearm, clean components like the barrel and slide rails with solvent, then lubricate frame rails, slide rails, and the barrel exterior.

Chapters

  1. 00:00Introduction to Taurus Pistol Cleaning
  2. 00:35Recommended Maintenance Schedule
  3. 02:06Safety Check and Disassembly
  4. 03:30Essential Cleaning Supplies
  5. 04:45Cleaning the Barrel and Recoil Spring
  6. 05:33Cleaning the Slide and Extractor
  7. 08:23Cleaning the Frame and Trigger Mechanism
  8. 09:37Proper Lubrication Points
  9. 11:50Reassembly and Function Check
  10. 12:25Exterior Finish Protection

Frequently Asked Questions

How often should I clean my Taurus G3, G3C, G2, or G2C pistol?

According to the manufacturer's manual, these Taurus firearms should be cleaned approximately every 200 rounds. This includes lubricating key contact points and performing a basic inspection of pins and screws to ensure proper function.

What are the essential cleaning supplies for a Taurus G3 series pistol?

You'll need microfiber towels, cleaning patches (or old t-shirts), plastic picks, brushes, a quality firearm solvent, and a high-grade gun oil. Specific products like Breakthrough Clean solvent and Modern Spartan Systems oil are recommended.

What are the critical lubrication points on a Taurus G3 pistol?

The most important lubrication points are the frame rails, slide rails, and the exterior of the barrel where metal-on-metal wear occurs. Proper lubrication ensures smooth operation and reduces friction during firing.

What safety steps are crucial before cleaning a Taurus pistol?

Always begin with a thorough safety check. This involves removing the magazine and visually inspecting the chamber to confirm the firearm is unloaded before proceeding with field stripping or cleaning.

More Gunsmithing & DIY Videos You Might Like

More from Tactical Considerations

View all →