Firearm Maintenance: Single Action Revolver Lubrication Part 3/4

This guide details the installation of Slick Shot stainless steel nipples on a Pietta 1860 black powder revolver. The upgrade aims to improve reliability by preventing cap fragments from jamming the cylinder and potentially enhancing ignition consistency due to a larger internal passage. The process involves unscrewing old nipples and installing the new ones, with a specific note on using Remington #10 caps.

This guide details the disassembly and loading process for the 1858 Allen & Wheelock Side Hammer revolver, as demonstrated by a firearms enthusiast. It covers cylinder removal, manual loading with .22 Short cartridges, and reassembly, emphasizing proper handling of antique firearms and the use of appropriate ammunition. The presenter's expertise in antique firearm mechanics is evident throughout the demonstration.

This guide explains the sear mechanism in single-action revolvers, as detailed by The Yankee Marshal. It clarifies that revolvers do have sears, which are the engagement points between the hammer and trigger. The process involves cocking the hammer, which pulls the trigger until the trigger's leg locks into a notch on the hammer. Pulling the trigger further disengages this lock, allowing the hammer to fall and fire the weapon. The guide emphasizes the simplicity of this mechanism compared to semi-automatic firearms.

This guide details troubleshooting sticky case extraction issues with the Taurus 942M revolver, particularly after warranty repair. It emphasizes thorough cleaning, the potential benefits of nickel-plated ammunition, and suggests cylinder polishing as a potential DIY solution if warranty work proves insufficient. The speaker, an experienced shooter, notes that while improved, the issue was not fully resolved by the manufacturer.

This guide provides expert advice on cleaning and maintaining firearms with Scandium frames, specifically mentioning the Smith & Wesson Night Guard. The speaker, identified as experienced, details a cleaning process similar to aluminum frames, emphasizing light cleaning, oiling, and avoiding abrasives, while also highlighting the importance of checking for flame cutting.

This video title, "It puts the Aeroshell 64 on the threads or it gets the hose again," strongly suggests a discussion related to firearms maintenance, specifically the application of a lubricant or anti-seize compound (Aeroshell 64) to threaded components. The provocative phrasing implies a critical step or a consequence of not performing it correctly. Without a transcript, the exact nature of the firearm or the specific maintenance procedure is unknown, but it likely involves cleaning, assembly, or disassembly where threaded parts are involved, such as barrel nuts, muzzle devices, or receiver extensions.

This guide details the installation of a Geissele MK8 Super Modular Rail on an AR-15 platform. It covers securing the upper receiver, installing the barrel nut, gas system, and the rail itself, emphasizing the use of specialized tools and proper torque specifications. The process requires an intermediate skill level and careful attention to detail for a secure and functional build.

This guide, based on expert instruction from Brownells, details essential practices for proper ammunition storage. It emphasizes using airtight containers, managing humidity with desiccants, and maintaining stable temperatures to ensure ammunition reliability and safety. Proper storage is crucial for preventing corrosion and propellant degradation, especially for sensitive components like primers.

This guide details the process of upgrading an AR-15 from standard A2 furniture to Magpul components. It covers the removal of the A2 pistol grip and installation of the Magpul MIAD Grip and Magpul PRS Stock. The video demonstrates efficient assembly using specialized tools, highlighting the ergonomic benefits and adjustability of the Magpul parts. Instruction is provided by Brownells, a recognized industry authority.

This entry details the creation of a movie prop suppressor for a Remington 11-87 used in 'No Country for Old Men.' Prop master Larry Zanoff explains how the suppressor was designed to look homemade and was non-functional, with sound effects added in post-production. The process highlights the creative problem-solving involved in film armory.