GHG ARRE BROKE My GLOCK 23!!

Published on January 18, 2024
Duration: 11:02

This video details a malfunction experienced with a customized Glock 23, specifically a loose recoil spring assembly attributed to a gold-plated barrel. The presenter discusses the potential causes, the implications for firearm reliability, and explores options for repair, including the feasibility of using a Glock 19 spring. The experience highlights the importance of thorough testing after firearm modifications.

Quick Summary

A Glock 23 experienced a malfunction due to a loose recoil spring, potentially caused by a gold-plated barrel softening the spring. The presenter advises extensive testing (500+ rounds) after any firearm customization to ensure reliability and cautions against using springs from different models without proper assessment.

Chapters

  1. 00:17Texas Weather & Social Media Trends
  2. 00:56Recalling Past Freezes in Texas
  3. 01:48Heading to the Range
  4. 01:58Range Conditions: 70 Degrees
  5. 02:02Arriving at the Range
  6. 02:26Introducing the Glock 23
  7. 02:51Concern Over Gold-Plated Barrel
  8. 03:17First Shots on Steel
  9. 03:43Recoil Discussion
  10. 04:02Are Black Forces Bulletproof?
  11. 04:17Testing Bulletproof Shoes
  12. 05:19Firearm Malfunction Detected
  13. 05:33Blaming the Gun
  14. 06:01Attempting to Fix the Gun
  15. 06:15Slide Not Cycling Properly
  16. 06:49Identifying the Loose Spring
  17. 07:09Suspected Cause: Gold Plating
  18. 07:15Discussing Spring Replacement
  19. 07:42Considering a Glock 19 Spring
  20. 08:20Potential Dangers of Malfunction
  21. 08:32EDC Reliability Scenarios
  22. 09:04Importance of Keeping EDC Stock
  23. 09:18Examining the Loose Spring
  24. 09:53Advice on Customizing EDC
  25. 10:04Testing After Glock 19 Customization
  26. 10:20Considering Going Back to Factory
  27. 10:25Never Carry an Untested Gun

Frequently Asked Questions

What caused the Glock 23 malfunction in the video?

The Glock 23 malfunction was attributed to a loose recoil spring assembly. The presenter suspects that the gold plating on the barrel may have softened the spring, causing it to become excessively loose and preventing the slide from cycling correctly.

Is it safe to use a Glock 19 spring in a Glock 23?

The presenter expressed caution about using a Glock 19 spring in a Glock 23. They believe a stronger spring might be needed for the .40 S&W caliber and the modified barrel, and using a lighter spring could risk damaging the gun or causing injury.

What is the recommended practice after customizing a firearm?

After customizing a firearm, it is highly recommended to conduct extensive testing, ideally by firing at least 500 rounds. This ensures that all modifications are reliable and that the firearm cycles properly under various conditions before carrying it.

Why is keeping an EDC firearm stock sometimes advised?

Keeping an Everyday Carry (EDC) firearm stock is often advised because modifications, especially those not thoroughly tested, can introduce reliability issues. When you start altering components, you risk unforeseen malfunctions that could be critical in a self-defense situation.

More Gunsmithing & DIY Videos You Might Like

More from GHG Hussle

View all →