How to Set Up the High Speed 3-in-1 Power Case Trimmer

Published on May 20, 2025
Duration: 4:02

This guide details the assembly and setup of the Hornady High-Speed 3-in-1 Power Case Trimmer. It covers securing the unit, installing the correct caliber pilot and cutter housing, and adjusting the hard stop and micro adjust dial for precise case trimming. The process emphasizes accurate measurement and iterative adjustments to achieve the desired case length for high-volume reloading.

Quick Summary

To set up the Hornady High-Speed 3-in-1 Power Case Trimmer, secure it to your bench, install the correct caliber pilot and cutter housing, and reattach the shaving shield. For trim length, adjust the macro and micro stops, then power on the trimmer and slowly advance the case until the desired length is achieved. Calibrate by measuring and adjusting the micro dial based on the difference from ideal case length.

Chapters

  1. 00:08Trimmer Assembly Begins
  2. 00:14Securing the Trimmer and Removing Shield
  3. 00:19Cutter Housing and Pilot Installation
  4. 00:30Blade Tightening and Housing Reattachment
  5. 00:54Reattaching Shavings Shield and Tray
  6. 01:04Collet and Pilot Storage
  7. 01:17Collet Selection and Insertion
  8. 01:43Case Catch Bin Installation
  9. 01:47Trimmer Setup Procedure Begins
  10. 01:51Adjusting Hard Stop
  11. 01:59Securing Case in Collet
  12. 02:04Initial Shuttle Adjustment
  13. 02:08Setting the Adjustable Hard Stop
  14. 02:18Micro Adjust Dial Calibration
  15. 02:25Powering On and Initial Trim
  16. 02:33Fine-Tuning Trim Depth
  17. 02:42Removing Case and Measuring Length
  18. 02:50Calculating Micro Adjust Clicks
  19. 03:01Reinstalling Case for Final Trim
  20. 03:06Final Trim Process
  21. 03:13Completion of Trimming
  22. 03:22Post-Trim Measurement and Adjustment
  23. 03:33Bulk Trimming and Multi-Functionality
  24. 03:40Quality Checks During Bulk Trimming
  25. 03:45Product Overview

Frequently Asked Questions

How do I assemble the Hornady High-Speed 3-in-1 Power Case Trimmer?

Begin by securing the trimmer to your bench. Remove the shaving shield, then detach the cutter housing from the motor shaft. Insert the correct caliber pilot into the housing, tighten its set screws, and ensure the blades are secure. Reattach the cutter housing to the motor shaft, then replace the shaving shield and shavings tray.

What is the process for setting the trim length on the Hornady Power Case Trimmer?

Insert a case, secure it, and bring the case mouth to the pilot. Adjust the macro and micro stops until the case mouth is just off the cutters. Power on the trimmer, push the shuttle forward until the micro adjust screw contacts the hard stop, then slowly turn the micro adjust dial clockwise to achieve the desired trim length.

How do I calibrate the Hornady 3-in-1 Power Case Trimmer for accurate case lengths?

After initial trimming, remove the case and measure its length with calipers. Subtract the ideal case length from your measurement and turn the micro adjust dial clockwise the corresponding number of clicks. Reinstall the case and trim again, repeating the measurement and adjustment process until the desired length is achieved.

What are the key components for setting up the Hornady case trimmer?

Key components include the caliber pilot, which aligns the case mouth, and the case rim-specific collet, which securely holds the cartridge. The macro adjust hard stop and micro adjust dial are critical for setting and fine-tuning the precise case length for trimming.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Hornady Manufacturing

View all →