Interview with Jack Rowe by Larry Potterfield | British Side-by-Side Shotguns | MidwayUSA

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the process of fitting and trimming an aftermarket rail intended for a 6-inch barrel Colt Python to a 4-inch barrel model. The primary challenge is the difference in barrel ramp angles, which prevents a flush fit. The process involves cutting the rail to size and applying a finish to the exposed metal.

This guide details the installation of Slick Shot stainless steel nipples on a Pietta 1860 black powder revolver. The upgrade aims to improve reliability by preventing cap fragments from jamming the cylinder and potentially enhancing ignition consistency due to a larger internal passage. The process involves unscrewing old nipples and installing the new ones, with a specific note on using Remington #10 caps.

This guide details the process of upgrading Colt Grizzly and Kodiak revolvers by replacing rubber grips with aftermarket wood grips and installing a fiber optic front sight on the Grizzly. The speaker emphasizes the aesthetic and functional improvements gained from these modifications, noting that parts interchangeable with Colt Pythons will also fit these models. The process involves careful removal of old parts and precise installation of new ones, including the use of Loctite for sight security.

This guide details the process of removing CMMG's Plan B style muzzle devices, which are secured with Hot Lock thread locker. The video explains that if the device is not heat-cured, it can be removed with a 13/16 inch wrench. However, if heat-cured through shooting or direct application, removal requires soaking in water for at least 30 minutes, potentially followed by a penetrating lubricant. The presenter, Mike from CMMG, emphasizes that heat-curing makes the attachment permanent.

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This guide details a high-speed Cowboy Action Shooting stage, demonstrating expert transitions between a lever-action rifle, dual single-action revolvers, and a side-by-side shotgun. It highlights efficient manual shotgun reloading techniques from a belt carrier, showcasing advanced proficiency in competitive shooting disciplines. The video emphasizes speed and accuracy across multiple firearm types.

This video provides an expert-level demonstration of the Mosin-Nagant M91/30 PU Sniper rifle. It covers visual inspection, the proper loading procedure for 7.62x54R ammunition, and live fire at an outdoor range, showcasing bolt manipulation and recoil control. The demonstration is presented in a silent, ASMR-style format by an authoritative demonstrator.

This guide details the complex process of reboring a Winchester 1885 Low Wall rifle from .32 Rimfire to .357 Magnum, addressing a pitted bore. Expert gunsmith Larry Potterfield demonstrates disassembly, barrel removal, specialized reboring at Delta Gun Shop, chambering, crowning, action conversion, and final marking/finishing. The process highlights advanced machining techniques and specialized tools required for such a conversion.

This guide details the cycle of operation for the Winchester Model 12 shotgun, as explained by Larry Potterfield of MidwayUSA using a cutaway model. It covers loading, safety engagement, firing, extraction, and chambering. The explanation highlights the hammerless pump-action design and internal component interactions, offering valuable insights for gunsmithing and understanding firearm mechanics.