KEL-TEC KSG | Field Strip

Published on May 9, 2020
Duration: 6:30

This expert-level guide details the field stripping and reassembly process for the KEL-TEC KSG shotgun, as demonstrated by Arm&Gun. It covers removing the lower receiver, buttstock, bolt carrier group, and front end, including specific tips for the magazine tubes and bolt reinsertion. The guide emphasizes safety checks and provides clear, step-by-step instructions for both disassembly and reassembly, suitable for intermediate-level users.

Quick Summary

To field strip a KEL-TEC KSG, first ensure it's unloaded and safe. Remove the two lower receiver push pins, then separate the lower receiver and pistol grip. Next, remove the buttstock, followed by the bolt carrier group. For deeper cleaning, detach the front end by turning the magazine tubes a quarter turn each. Finally, separate the barrel assembly from the receiver.

Chapters

  1. 00:00Introduction & Safety Check
  2. 00:16Removing Lower Receiver
  3. 00:57Separating Trigger Group/Pistol Grip
  4. 01:13Removing Buttstock
  5. 01:31Removing Bolt Carrier Group
  6. 01:57Removing Front End/Mag Tubes
  7. 02:26Tool for Mag Tube Caps
  8. 02:44Separating Barrel & Receiver
  9. 03:21Reassembly: Mag Tubes & Barrel
  10. 03:44Reassembly: Mag Tube Caps
  11. 04:02Reassembly: Bolt Carrier Group
  12. 04:49Reassembly: Buttstock
  13. 05:07Reassembly: Lower Receiver/Trigger Group
  14. 05:27Final Check & Conclusion
  15. 05:50Bonus Gun: Benelli M4

Frequently Asked Questions

How do you field strip a KEL-TEC KSG shotgun?

To field strip a KEL-TEC KSG, first ensure it's unloaded and safe. Remove the two lower receiver push pins, then separate the lower receiver and pistol grip. Next, remove the buttstock, followed by the bolt carrier group. For deeper cleaning, detach the front end by turning the magazine tubes a quarter turn each. Finally, separate the barrel assembly from the receiver.

What tools are needed to disassemble the KEL-TEC KSG's magazine tubes?

For the KEL-TEC KSG, you can use a 12 gauge shotshell or a quarter to loosen and tighten the magazine tube end caps. This allows for easier removal and reinstallation of the magazine tubes during field stripping and maintenance.

What is the most challenging part of reassembling the KEL-TEC KSG?

The most challenging part of reassembling the KEL-TEC KSG is reportedly the reinsertion of the bolt carrier group. It requires ensuring the lug is flush, inserting the bolt sideways, and then rotating it to fit through the receiver slots before sliding the action home.

How do you properly reassemble the magazine tubes on a KEL-TEC KSG?

When reassembling the KEL-TEC KSG's magazine tubes, turn each tube a quarter turn at a time. This is crucial because they are mounted in unison, and overtightening one can bind the entire system. Ensure they are evenly seated.

More Gunsmithing & DIY Videos You Might Like

More from Arm&Gun

View all →