My New EDC's 1st Makeover! (Changing Ruger .454 Casull Alaskan Sights/Grips)

Published on December 20, 2022
Duration: 6:05

This guide details the process of upgrading a Ruger .454 Casull Alaskan by replacing its front sight and grips. The front sight replacement involves careful drilling and pinning, while grip installation is more straightforward. The video also touches upon using a compatible rear sight from Williams Gun Sight for a fiber optic setup.

Quick Summary

To replace the front sight on a Ruger Alaskan, remove the grip, tap out the old sight pin with a 1/16-inch punch, and remove the old sight. Position the new sight, tape it, and drill through from both sides to meet in the middle. Reinsert the pin and install the new grip. Always ensure the firearm is unloaded and wear safety glasses.

Chapters

  1. 00:00Introduction: New EDC Ruger Alaskan
  2. 00:40Removing the Grip
  3. 00:41Tapping Out the Front Sight Pin
  4. 01:02Removing the Old Front Sight
  5. 01:11Installing the New Hi-Viz Front Sight
  6. 01:25Taping the Sight in Place
  7. 01:30Drilling the Front Sight (Side 1)
  8. 01:43Drilling the Front Sight (Side 2)
  9. 01:50Dealing with a Broken Drill Bit
  10. 02:06Reinserting the Front Sight Pin
  11. 02:32Installing New Grips
  12. 02:55Considering a Williams Rear Sight
  13. 03:03Transferring Springs and Screw
  14. 03:16Installing the New Front Post
  15. 03:30Final Look: Fiber Optic Sights & New Grips
  16. 03:49Ready to Carry and Recalibrate

Frequently Asked Questions

How do you replace the front sight on a Ruger Alaskan?

To replace the front sight on a Ruger Alaskan, first remove the grip. Then, tap out the old sight pin with a 1/16-inch punch. Position the new sight, tape it securely, and drill through it from both sides to ensure a straight hole. Finally, reinsert the pin and install the new grip.

What tools are needed for changing sights on a Ruger Alaskan?

Essential tools for changing sights on a Ruger Alaskan include a vise, a 1/16-inch punch, a drill with appropriate bits, tape, oil, a nylon hammer, and a pin punch. Safety glasses are also crucial.

What are the benefits of fiber optic sights on a Ruger Alaskan?

Fiber optic sights, like the Hi-Viz front sight and potential Williams rear sight, significantly improve sight acquisition in various lighting conditions. They gather ambient light, making the front sight more visible for faster and more accurate aiming.

Can I install aftermarket grips on my Ruger Alaskan?

Yes, you can install aftermarket grips on your Ruger Alaskan. Brands like Altamont offer custom grips that can enhance ergonomics and aesthetics. The installation typically involves removing the old grip and securing the new one with the firearm's grip pins.

More Gunsmithing & DIY Videos You Might Like

More from TheYankeeMarshal

View all →