PH Mike Birch Discusses Stock Design

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the process of fitting and trimming an aftermarket rail intended for a 6-inch barrel Colt Python to a 4-inch barrel model. The primary challenge is the difference in barrel ramp angles, which prevents a flush fit. The process involves cutting the rail to size and applying a finish to the exposed metal.

This guide details the installation of Slick Shot stainless steel nipples on a Pietta 1860 black powder revolver. The upgrade aims to improve reliability by preventing cap fragments from jamming the cylinder and potentially enhancing ignition consistency due to a larger internal passage. The process involves unscrewing old nipples and installing the new ones, with a specific note on using Remington #10 caps.

This guide details the process of upgrading Colt Grizzly and Kodiak revolvers by replacing rubber grips with aftermarket wood grips and installing a fiber optic front sight on the Grizzly. The speaker emphasizes the aesthetic and functional improvements gained from these modifications, noting that parts interchangeable with Colt Pythons will also fit these models. The process involves careful removal of old parts and precise installation of new ones, including the use of Loctite for sight security.

This guide details the process of removing CMMG's Plan B style muzzle devices, which are secured with Hot Lock thread locker. The video explains that if the device is not heat-cured, it can be removed with a 13/16 inch wrench. However, if heat-cured through shooting or direct application, removal requires soaking in water for at least 30 minutes, potentially followed by a penetrating lubricant. The presenter, Mike from CMMG, emphasizes that heat-curing makes the attachment permanent.

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This video from NRA Publications provides an in-depth look at the manufacturing process of Hornady ammunition, from bullet creation to final packaging. It details the steps involved in forming bullets, annealing and shaping cartridge cases, and rigorous quality control testing to ensure product reliability. The expert-level instruction highlights the precision engineering and domestic manufacturing of Hornady products in Grand Island, Nebraska, USA.

This video provides an expert overview of the British L1A1 SLR, a variant of the FN FAL. Mark A. Keefe IV, Editor-in-Chief of American Rifleman, details its design differences from the Belgian FN FAL, its extensive service history in conflicts like the Falklands War, and its eventual replacement. The segment highlights the rifle's robust construction, its adoption strategy by British Ordnance, and its legacy in firearm history.

This video documents a startling bobcat attack on a turkey hunter. The hunter's calls, intended for turkeys, attracted a bobcat which stalked and then pounced. The hunter's reaction caused the bobcat to retreat, highlighting the unpredictable nature of wildlife encounters and the importance of situational awareness.

This video details the revival of Remington Ammunition under Vista Outdoor's ownership, focusing on the Lonoke, Arkansas facility. It highlights the brand's historical significance, the challenges faced during bankruptcy, and the strategic steps taken by Vista Outdoor to restore production, quality, and employee morale. The narrative emphasizes a commitment to American manufacturing and supporting the Second Amendment.