Rejoining Shotgun Barrels | MidwayUSA Gunsmithing

This video details the comprehensive restoration of a Remington Model 11 shotgun stock, addressing common issues like oil saturation, cracks, and damaged buttplates. Advanced techniques such as acetone degreasing, epoxy and polyurethane glue repairs, steam-based dent removal, and a 'sanded-in' Permalyn finish are demonstrated. The process concludes with meticulous checkering recutting and final assembly, showcasing master-level gunsmithing.

This video details the 'rejoining' process for loose British side-by-side shotguns, specifically addressing the 'off the face' condition. It demonstrates how to diagnose looseness using smoke and then meticulously refit the barrels to the receiver by replacing the hinge pin with an oversized one. The process involves reaming the receiver, fitting a new pin, and carefully filing the barrel hook and breech face for a tight, precise fit.

This video provides a detailed, step-by-step guide to disassembling a Spanish AYA sidelock side-by-side shotgun, presented by gunsmith Jack Rowe. It covers the removal of various pins, the action from the stock, and the internal components of the sidelock mechanism, including cocking levers, springs, and sears. The demonstration highlights key differences in design compared to English sidelocks and emphasizes the importance of careful handling of small parts.

This video demonstrates the process of 'striping' the breech face of a British side-by-side shotgun. The technique is presented as a method to enhance the aesthetic appearance of the firearm. The video features Jack Rowe and Larry Potterfield, founder and CEO of MidwayUSA, working on an older English double shotgun. It highlights a specific gunsmithing technique for classic firearms and directs viewers to the MidwayUSA Video Library for more content.

This video details the process of relaying the rib on a vintage Remington Model 1900 side-by-side shotgun. Larry Potterfield demonstrates how to diagnose a loose rib using a rubber mallet and the 'ring test'. The repair involves carefully heating the barrels to melt old solder, removing the rib, thoroughly cleaning and preparing the metal surfaces, and then re-soldering the rib using 50/50 lead-tin solder and flux.

This video discusses the repair of an "over/under stock" on a firearm that has endured over 35,000 rounds. The creator emphasizes that this is not a tutorial and warns against attempting the repair without the necessary expertise. A link to another video showcasing a "chipped toe repair" is also provided. The video aims to share maintenance procedures for a heavily used firearm.

This video showcases advanced Cowboy Action Shooting techniques demonstrated by The Lever Action Kid. It highlights rapid engagement with a lever-action rifle, followed by a high-speed transition to dual single-action revolvers. The stage concludes with efficient manual reloading of a side-by-side shotgun.

This video provides an in-depth look at the Mosin-Nagant M91/30 PU Sniper rifle, showcasing its historical significance and operational features. It details the firearm inspection, loading procedures for 7.62x54R rounds, and a live-fire demonstration. The expert handling and clear visuals highlight the rifle's characteristics and performance.

This video details the complex gunsmithing process of reboring a Winchester 1885 Low Wall rifle from a pitted .32 Rimfire to a .357 Magnum. It covers barrel removal, sending it to a specialized shop for reboring and rifling, precise chambering and crowning on a lathe, and converting the action from rimfire to centerfire. The process concludes with barrel marking and finishing.

This video details the internal mechanics and cycle of operation for the Winchester Model 12 pump-action shotgun using a cutaway model. It explains the loading process into the magazine tube, the function of the safety mechanism, and the sequence of firing, extraction, and chambering. The demonstration highlights the hammerless design and the interaction of key components like the extractor and ejector.