Savage 110 Elite 6.5 Creedmoor FIXED! Step By Step How to Get Your 110 to Cycle Properly.

Published on March 25, 2021
Duration: 18:13

This video provides a step-by-step guide on how to modify the ejector on a Savage 110 Elite rifle chambered in 6.5 Creedmoor to address common cycling, extraction, and ejection issues. The process involves carefully removing material from the ejector and beveling it towards the firing pin. The instructor emphasizes the importance of safety during disassembly and reassembly, and recommends using sandpaper on a flat surface as an alternative to a belt grinder for the modification.

Quick Summary

A common fix for Savage 110 Elite 6.5 Creedmoor cycling issues involves modifying the ejector. This process requires removing approximately 0.001-0.002 inches of material from the top of the ejector and creating a 45-degree bevel towards the firing pin, often done with a belt grinder or sandpaper on a flat surface.

Chapters

  1. 00:00Introduction: Savage 110 Elite 6.5 Creedmoor Issues
  2. 01:07Criticism of Savage's Response to Known Issues
  3. 03:22The Ejector Modification Fix
  4. 04:50Disassembling the Savage 110 Bolt
  5. 06:22Removing the Ejector
  6. 08:43Preparing the Ejector for Modification
  7. 09:25Modifying the Ejector (Belt Grinder/Sandpaper)
  8. 10:03Detailed Ejector Modification Process
  9. 11:29Ejector Modification Results (Before/After)
  10. 13:06Reassembling the Bolt
  11. 13:09Live Fire Testing of the Modified Rifle
  12. 14:34Initial Results and Impressions
  13. 15:14Final Thoughts on Savage and the Fix
  14. 17:22Conclusion and Training Information

Frequently Asked Questions

What are the common issues with the Savage 110 Elite in 6.5 Creedmoor?

The Savage 110 Elite in 6.5 Creedmoor is known to experience significant cycling, extraction, and ejection problems. These issues appear to be specific to this caliber and model, impacting its reliability in feeding and clearing spent cartridges.

How can the cycling issues on a Savage 110 Elite 6.5 Creedmoor be fixed?

A common fix involves modifying the ejector. This typically entails removing a small amount of material from the top surface of the ejector and creating a slight bevel towards the firing pin to improve its interaction with the bolt face and casing rim.

What tools are needed to modify the ejector on a Savage 110 Elite?

Essential tools include a 1/16 inch punch for removing the ejector retaining pin and needle-nose pliers to extract the ejector. For the modification itself, a belt grinder on a slow speed or sandpaper taped to a flat surface is recommended for precise material removal and beveling.

Why is live fire necessary to test firearm cycling issues?

Live fire is crucial because the expansion of a cartridge within the chamber creates real-world stresses and potential drag that dry firing cannot replicate. This ensures an accurate assessment of how the firearm loads, chambers, extracts, and ejects live ammunition.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Paramount Tactical

View all →