SIG Sauer P225 | P6 DA/SA 9mm pistol DPM System Install

Published on February 22, 2026
Duration: 6:25

This guide details the installation of a DPM recoil reduction system on a SIG Sauer P225/P6 pistol. The process involves field stripping the firearm, removing the old guide rod and spring, and installing the new DPM assembly with one of its three included springs. The presenter highlights the system's potential to increase pistol service life and improve follow-up shot speed by reducing felt recoil. The video also provides insights into the P225/P6's historical context and features.

Quick Summary

The DPM recoil reduction system for the SIG Sauer P225/P6 aims to increase the pistol's service life and improve follow-up shot speed by reducing felt recoil. Installation is straightforward, replacing the factory guide rod and spring without requiring extra parts like bushings or washers. The system includes multiple springs for tuning.

Chapters

  1. 00:00Introduction to DPM System & P225/P6
  2. 00:21DPM Guide Rod Comparison (Old vs. New)
  3. 00:43Disassembly & Removing Old Guide Rod
  4. 01:32DPM System Components & Installation Steps
  5. 02:10Benefits of the DPM System
  6. 02:38Pistol Features & History (P225/P6)
  7. 03:30Trigger & Frame Details
  8. 04:43Trigger Pull Measurement (DA/SA)
  9. 05:43Conclusion & DPM System Recommendation

Frequently Asked Questions

What is the DPM recoil reduction system and what are its benefits for a SIG Sauer P225/P6?

The DPM recoil reduction system is an aftermarket upgrade designed to replace the factory guide rod and recoil spring. Its primary benefits for the SIG Sauer P225/P6 include potentially increasing the pistol's service life and enabling faster follow-up shots by significantly reducing felt recoil.

How do you install the DPM recoil reduction system on a SIG Sauer P225/P6?

Installation involves field stripping the P225/P6, removing the original guide rod and spring, and then inserting the DPM guide rod assembly. The DPM system is designed for easy installation without needing a bushing or washer, and it comes with multiple springs for tuning.

What are the key features and history of the SIG Sauer P225/P6 pistol?

The SIG Sauer P225/P6 is a 9mm, 8+1 capacity, single-stack pistol, often recognized as a former German military sidearm. It's a classic DA/SA design known for its robust construction and reliable performance, typically dating from the late 1980s or early 1990s.

What were the trigger pull weights measured for the SIG Sauer P225/P6?

During testing, the double-action trigger pull for the SIG Sauer P225/P6 was measured at approximately 14 pounds, exceeding the capacity of the testing scale. The single-action trigger pull was found to be crisp, averaging just under 5 pounds, specifically around 4 pounds 12 ounces.

More Gunsmithing & DIY Videos You Might Like

More from BERETTA9mmUSA

View all →