SVT 40 Tokarev Field Strip

Published on August 9, 2017
Duration: 6:54

This video provides a detailed guide on the field stripping and reassembly of the SVT-40 rifle. It highlights the correct method for removing the bolt and recoil spring assembly to avoid damage, and details the steps for disassembling and reassembling the gas system, handguard, and other components. The instructor emphasizes safety precautions and notes the complexity of reassembling the bolt and recoil spring.

Quick Summary

To correctly remove the bolt and recoil spring from an SVT-40, slide the bolt to the rear, then tilt the rifle to the right. The bolt should then slide out of the receiver via a groove on the right side, allowing the recoil spring to decompress naturally without bending.

Chapters

  1. 00:16Safety Check
  2. 00:25Receiver Cover Removal
  3. 00:38Incorrect Bolt Removal (and why)
  4. 01:01Correct Bolt & Recoil Spring Removal
  5. 01:23Separating Bolt from Recoil Spring
  6. 01:34Cleaning Rod Removal
  7. 01:44Sling Swivel Removal
  8. 01:52Gas Tube Cover & Handguard Removal
  9. 02:01Gas System Components
  10. 02:14Gas Plug & Adjustable System
  11. 03:05Reassembly Start: Bolt & Recoil Spring
  12. 03:47Gas System Reassembly
  13. 03:51Handguard & Gas Tube Cover Reinstallation
  14. 04:06Sling Swivel Reinstallation
  15. 04:08Cleaning Rod Reinstallation
  16. 04:17Final Bolt & Recoil Spring Insertion
  17. 05:00Function Check

Frequently Asked Questions

What is the correct way to remove the bolt and recoil spring from an SVT-40?

To correctly remove the bolt and recoil spring from an SVT-40, slide the bolt to the rear, then tilt the rifle to the right. The bolt should then slide out of the receiver via a groove on the right side, allowing the recoil spring to decompress naturally without bending.

What are the key components of the SVT-40 gas system?

The SVT-40 gas system consists of two main capsules containing a rod that the gas runs on, one at the chamber end and one at the gas tube end. The gas plug is threaded inside the gas tube and allows for adjustable gas flow.

Why is it important to be careful when disassembling the SVT-40's recoil spring?

Pulling the recoil spring assembly straight out from the rear can bend the springs and rods, causing damage. The correct method of tilting the rifle allows for natural decompression, preventing component stress and potential breakage.

What safety precautions should be taken when handling an SVT-40?

Always ensure the firearm is clear and safe before any disassembly. Due to the potential for slam fires, especially with older or worn SVT-40s, it is crucial to wear eye protection when firing the rifle.

More Gunsmithing & DIY Videos You Might Like

More from TFB TV

View all →