When the boss catches you NOT working.

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the process of fitting and trimming an aftermarket rail intended for a 6-inch barrel Colt Python to a 4-inch barrel model. The primary challenge is the difference in barrel ramp angles, which prevents a flush fit. The process involves cutting the rail to size and applying a finish to the exposed metal.

This guide details the installation of Slick Shot stainless steel nipples on a Pietta 1860 black powder revolver. The upgrade aims to improve reliability by preventing cap fragments from jamming the cylinder and potentially enhancing ignition consistency due to a larger internal passage. The process involves unscrewing old nipples and installing the new ones, with a specific note on using Remington #10 caps.

This guide details the process of upgrading Colt Grizzly and Kodiak revolvers by replacing rubber grips with aftermarket wood grips and installing a fiber optic front sight on the Grizzly. The speaker emphasizes the aesthetic and functional improvements gained from these modifications, noting that parts interchangeable with Colt Pythons will also fit these models. The process involves careful removal of old parts and precise installation of new ones, including the use of Loctite for sight security.

This guide details the process of removing CMMG's Plan B style muzzle devices, which are secured with Hot Lock thread locker. The video explains that if the device is not heat-cured, it can be removed with a 13/16 inch wrench. However, if heat-cured through shooting or direct application, removal requires soaking in water for at least 30 minutes, potentially followed by a penetrating lubricant. The presenter, Mike from CMMG, emphasizes that heat-curing makes the attachment permanent.

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This video from Louisiana Firearms, presented by an expert instructor, demonstrates a critical safety protocol for gun stores. It highlights the severe safety violation of a customer drawing their own concealed firearm while browsing. The expert instructor immediately intervenes, secures the weapon, and educates the customer on proper conduct, emphasizing that such actions are unacceptable and dangerous in a retail environment.

This video from Louisiana Firearms humorously illustrates a critical rule for gun store etiquette: customers should never go behind the counter. The content highlights inappropriate customer behavior and the store's response, emphasizing that browsing should occur in designated customer areas. It serves as a cautionary tale about respecting store policies and staff boundaries.

This video presents a satirical look at a customer entering a gun store in full tactical gear, parodying "boot" military behavior. It humorously depicts firearm inspection, negotiation, and departure, while subtly showcasing popular firearms like the Sig Sauer M17/M18 and a custom AR-15. The skit highlights common stereotypes in a comedic fashion.

This video from Louisiana Firearms provides crucial safety advice for gun stores and introduces a theoretical defensive technique called 'Pop, Lock, and Drop' for disarming an assailant. The instructor, a professional retailer, emphasizes the paramount importance of never drawing a firearm inside a store, even for holster comparisons, to maintain safety. The content serves as a cautionary tale against reckless behavior in potentially dangerous environments.