Wilson Combat - Firing Pin Spring Replacement

This guide details the process of replacing the mainspring on a Swiss Luger 1900. It covers identifying a failed mainspring, the correct direction for removal, manipulating the grip safety, compressing and installing the new spring with safety precautions, and reassembly. The new spring is noted to be significantly stiffer, requiring a specific operational technique for this model.

This video provides a step-by-step guide on installing the Recoil Reaper hydraulic buffer from Jacob Gray into a 2011 pistol. The installation process involves disassembling the firearm, removing the original guide rod and spring, and then carefully reassembling with the new hydraulic buffer and the OEM recoil spring. The presenter notes the potential for a 20-30% recoil reduction and demonstrates a function check post-installation.

This video provides a clear, step-by-step guide on how to field strip and reassemble the Browning Hi-Power pistol. It highlights key differences from the 1911 design, such as its linkless barrel system, and emphasizes safety precautions throughout the process. The demonstration covers magazine removal, chamber checks, slide stop manipulation, spring and barrel removal, and the reverse process for reassembly.

This video provides a step-by-step guide for field stripping the Star PD pistol. It highlights similarities and differences compared to a 1911, emphasizing the captive recoil spring as an improvement. The process involves aligning specific notches and circles to release the slide stop, then carefully removing the slide and barrel.

This guide details the simplified field stripping process for the Laugo Arms Remus pistol, as demonstrated by an expert from Forgotten Weapons. The Remus utilizes a new disassembly lever, eliminating the need for tools or pins required by the original Alien model. This process is crucial for routine cleaning and maintenance.

This guide details the cleaning and maintenance process for a Smith & Wesson M&P9 M2.0, specifically addressing a police trade-in. It covers initial inspection, cleaning with wipes, proper lubrication of slide rails and internal components using Combat Lube, reassembly, and functional checks of the slide action and tritium night sights. The video highlights the value of acquiring trade-in firearms at a lower cost compared to new models.

This guide details the dangers of 'thumbing the hammer down' on a loaded firearm, a technique strongly advised against by experts. It emphasizes that this action, which involves pulling the trigger while manually lowering the hammer, carries a high risk of accidental discharge if the thumb slips. The expert instruction highlights safer alternatives like engaging the manual safety for 'cocked and locked' carry or clearing the chamber entirely.

This guide details the advanced technique of hand stippling a 1911 firearm frame for enhanced grip, as demonstrated by a master gunsmith. It covers the precise application of texture using a punch and hammer, followed by meticulous filing to refine the edges. This process requires significant skill and attention to detail for a professional finish.

This guide details the proper technique for cycling the slide on a semi-automatic pistol, specifically the 1911, as explained by Ken Hackathorn. It emphasizes avoiding "gun abuse" by not slamming the slide on an empty chamber, which can cause premature wear. The explanation includes the mechanical reasons behind this, focusing on how the cartridge rim stabilizes the extractor and cushions the slide's action.

Massad Ayoob, a renowned firearms instructor and legal expert, details the critical post-Defensive Gun Use (DGU) protocol. He emphasizes that the most common mistake is failing to immediately call 911 after a DGU, even if no shots were fired. This action is crucial for establishing oneself as the victim complainant in the ensuing legal aftermath.