GOOD NEWS ! Springfield 1911 DS Prodigy MAJOR ISSUES UPDATE #2 (500+ Rounds In)

Published on October 18, 2022
Duration: 10:09

This video provides an update on the Springfield 1911 DS Prodigy 4.25 inch barrel after over 500 rounds. The presenter notes a significant improvement in reliability, with only two failure-to-feed incidents in 300 rounds, down from previous issues. The advice is to break in the firearm with at least 500 rounds before considering sending it back to Springfield Armory for potential issues, suggesting that many problems may resolve with a proper break-in period and lubrication.

Quick Summary

The Springfield 1911 DS Prodigy 4.25 inch is recommended to have at least a 500-round break-in period to resolve potential reliability issues. After approximately 300 rounds, the presenter observed a significant reduction in failure-to-feed incidents, suggesting that proper lubrication and cycling are key to its performance.

Chapters

  1. 00:00Introduction & New Magazine
  2. 00:37Prodigy DS 4.25" Update
  3. 01:15Great News & Reduced Hiccups
  4. 01:37Ammunition Used
  5. 02:00Specific Failure to Feed Incident
  6. 03:00Magazine Usage
  7. 03:20Break-in Period Discussion
  8. 04:09Round Count & Performance
  9. 04:21Recent Range Session
  10. 04:54Total Rounds & Failures
  11. 05:48Recommendation: 500 Rounds Break-in
  12. 06:21Gun's Performance Evolution
  13. 06:50Testing Different Magazines
  14. 07:20Hex Sight Critique
  15. 08:00Gas Port & Optic Fouling
  16. 08:27Compensator Fouling
  17. 08:45Overall Good News & Advice
  18. 08:52Comparison to AP5
  19. 09:23Content & Future Videos
  20. 09:51Conclusion & Call to Action

Frequently Asked Questions

What is the recommended break-in period for the Springfield 1911 DS Prodigy 4.25 inch?

The presenter recommends putting at least 500 rounds through the Springfield 1911 DS Prodigy 4.25 inch to allow for a proper break-in period. This is suggested to resolve potential reliability issues and ensure the firearm functions smoothly before considering sending it back to the manufacturer.

What types of ammunition were used in the Springfield Prodigy DS 4.25 inch reliability test?

During the reliability testing of the Springfield 1911 DS Prodigy 4.25 inch, the presenter used Remington 124 grain +P and AAC 124 grain 9mm ammunition. These were chosen to assess the firearm's performance with common defensive and training rounds.

How did the Springfield 1911 DS Prodigy 4.25 inch perform after a break-in period?

After approximately 300 rounds, the Springfield 1911 DS Prodigy 4.25 inch showed significant improvement, with only two failure-to-feed incidents. This is a marked improvement from previous testing where malfunctions were more frequent.

What are the potential issues with the gas port on the Springfield 1911 DS Prodigy?

The gas port on the Springfield 1911 DS Prodigy, which indicates a loaded chamber, directs gas upwards. This can cause the front lens of an attached red dot sight or optic to become excessively dirty during firing.

More Reviews Videos You Might Like

More from 2WiLD Guns

View all →