Assembling a SecureIt Agile Model 40 Superlight | BUILD BOX

Published on August 17, 2023
Duration: 6:55

This guide details the assembly of the SecureIt Agile Model 40 Superlight safe, as demonstrated by an experienced instructor. It covers the necessary tools, step-by-step panel assembly, and final internal bolt installation. The process is designed for efficiency, with subsequent assemblies taking approximately 25 minutes. Key tips include orienting louvers correctly and not forgetting to secure the top studs.

Quick Summary

Assemble the SecureIt Agile Model 40 safe efficiently with a few common tools: a 10mm socket wrench, 10mm and 8mm wrenches, and a Phillips screwdriver with a P2 bit. The assembly process is straightforward, with louvers on the back panel facing inward and upwards for rack compatibility.

Chapters

  1. 00:00Introduction to SecureIt Agile Model 40
  2. 00:31Required Tools for Assembly
  3. 00:50Assembling Back Panel and Base
  4. 01:13Orienting Louvers and Securing Back
  5. 01:40Adding Side Panels and Corner Pieces
  6. 02:40Installing Panel Connector Bolts
  7. 03:07Attaching Front Panel and Corners
  8. 03:55Securing Top Panel
  9. 04:28Opening Door and Final Internal Bolts
  10. 06:00Important Assembly Tips
  11. 06:38Completed Safe and Outro

Frequently Asked Questions

What tools are needed to assemble the SecureIt Agile Model 40 safe?

You will need a small socket wrench with a 10mm deep well socket, a 10mm wrench, an 8mm wrench, and a Phillips screwdriver with a P2 bit for assembling the SecureIt Agile Model 40.

How long does it typically take to assemble a SecureIt Agile Model 40 safe?

While the first assembly might take around an hour, experienced individuals can assemble the SecureIt Agile Model 40 safe in approximately 25 minutes due to its efficient design.

What is the correct orientation for the back panel louvers on the SecureIt Agile Model 40?

The louvers on the back panel of the SecureIt Agile Model 40 should face inwards, with the sharp edge positioned upwards. This orientation is crucial for properly hanging gun storage racks inside the safe.

Are there any common mistakes to avoid when assembling the SecureIt Agile Model 40?

A common mistake is forgetting to install the nuts on the two studs located on the top of the safe. It's also important to ensure the Phillips head of internal bolts faces inward for screwdriver access.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Gun Talk Media

View all →