Builtright Industries Molle Panel Install 2008 - 2019 Sierra/Silverado

Published on September 28, 2021
Duration: 9:45

This video provides a step-by-step installation guide for Builtright Industries Molle Panels on 2008-2019 GMC Sierra and Chevrolet Silverado trucks. The instructor details the tools required, the process of removing factory trim, and how to secure the steel panels using provided hardware. The installation involves specific wrenches and an allen key, with emphasis on properly pinching the panel into the truck bed's channel and securing it with bolts and brackets. The guide covers both sides of the truck bed and notes the panels are mirror images.

Quick Summary

To install Builtright Industries Molle Panels on a 2008-2019 Sierra or Silverado, you'll need a 3/8 inch wrench, 1/2 inch wrench, 5/32nd allen key, and a flathead screwdriver. The panels attach by 'pinching' the truck bed's side, secured by bolts that engage the bed's channel. They are made of steel, patented, and available for both standard and short beds.

Chapters

  1. 00:00Introduction and Product Overview
  2. 00:12Panel Features and Contents
  3. 01:12Required Tools for Installation
  4. 01:41Securing the Top Channel of the Panel
  5. 03:11Installing Horseshoe Brackets
  6. 04:04Connecting Panels and Initial Tightening
  7. 05:02Adjusting and Tightening the First Panel
  8. 05:31Climbing into the Truck Bed for Second Panel
  9. 06:06Connecting the Two Panels in the Middle
  10. 07:23Removing Plastic for Last Tie-Down Area
  11. 08:00Final Hardware Check
  12. 08:43Installing Rubber Stoppers
  13. 09:03Conclusion and Next Steps

Frequently Asked Questions

What tools are needed to install Builtright Industries Molle Panels on a 2008-2019 Sierra or Silverado?

You will need a 3/8 inch wrench, a 1/2 inch wrench, a 5/32nd allen key, and a flathead screwdriver to remove the factory plastic trim. These tools are essential for properly securing the steel Molle panels to your truck bed.

How do Builtright Industries Molle Panels attach to the truck bed?

These Molle panels attach by 'hugging' or 'pinching' the side of the truck bed. Bolts are inserted through the panel and into the bed's channel, with the primary securing mechanism being the top bolt that tightens against the bed's upper edge.

Are Builtright Industries Molle Panels specific to certain truck bed lengths?

Builtright Industries offers these Molle panels for both standard and short bed configurations of the 2008-2019 GMC Sierra and Chevrolet Silverado. The installation process is generally similar across these variants.

What are the key features of Builtright Industries Molle Panels?

These Molle panels are made of steel, are patented, and manufactured in America. They provide a versatile platform for organizing gear within the truck bed using the Molle system.

More Tactical & Gear Videos You Might Like

More from Marine X

View all →