BUL Armory Pro | Part 2: Accuracy, Velocity & Customer Service!

Published on August 1, 2024
Duration: 18:05

This video addresses accuracy issues experienced with the BUL Armory Tac Pro ported model, identifying plated ammunition as the primary cause due to potential disintegration and fouling in ported barrels. The presenter, Roger Barrera of QVO Tactical, details his experience working with BUL Armory to diagnose the problem, emphasizing the importance of using fully jacketed ammunition with ported firearms. The video also includes accuracy testing with various jacketed ammunition types and a comparison of velocity between ported and non-ported barrels.

Quick Summary

Plated ammunition can cause accuracy issues and fouling in ported firearms like the BUL Armory Tac Pro due to bullet disintegration. It is recommended to exclusively use fully jacketed ammunition with ported barrels and to check ammunition packaging for specific warnings.

Chapters

  1. 00:18Introduction & Part 2 Overview
  2. 00:21BUL Armory Tac Pro Ported Model Review
  3. 00:30BUL Armory's Diagnostic Process
  4. 01:01Identifying the Ammunition Issue
  5. 01:16Plated vs. Jacketed Ammunition Explained
  6. 01:30Test Firing with Blazer CCI
  7. 01:51Manufacturer's Recommendation
  8. 02:35Why Issues Occur in Ported Barrels
  9. 03:02BUL Armory's Cleaning Service
  10. 03:21Summary of Findings
  11. 03:42Accuracy Test Setup
  12. 04:16Magtech 115gr FMJ Accuracy Test
  13. 05:09Magtech Grouping Results
  14. 05:46Optic Adjustment
  15. 06:00SMB 115gr FMJ Accuracy Test (Take 1)
  16. 06:43SMB Grouping Results (Take 1)
  17. 07:05SMB 115gr FMJ Accuracy Test (Take 2)
  18. 07:56SMB Grouping Results (Take 2)
  19. 08:36Super Vel 124gr Jacketed Test
  20. 09:20Super Vel Grouping Results
  21. 10:09Super Vel Ammunition Overview
  22. 11:20Velocity Test Plan
  23. 11:38Chronograph Test: Non-Ported Barrel
  24. 12:45Chronograph Test: Ported Barrel
  25. 13:19Velocity Comparison Results
  26. 14:06Video Wrap-up & Technical Learnings
  27. 14:53Final Thoughts on BUL Armory Tac Pro
  28. 15:46Collaborative Problem Solving
  29. 16:08Ammunition Recommendations
  30. 16:37Velocity Test Recap
  31. 17:06Comparison to Other Firearms
  32. 17:21Cons of the BUL Armory Tac Pro
  33. 17:45Conclusion & Thanks

Frequently Asked Questions

What causes accuracy issues in ported firearms like the BUL Armory Tac Pro?

Accuracy issues in ported firearms, such as the BUL Armory Tac Pro, are often caused by plated ammunition. The spinning and momentum of plated bullets in ported barrels can lead to disintegration, causing fouling and fragments that degrade accuracy.

What type of ammunition should be used with ported firearms?

For ported firearms like the BUL Armory Tac Pro, it is recommended to exclusively use fully jacketed ammunition. Always check the ammunition packaging for specific warnings or recommendations regarding use in ported or compensated barrels.

Does porting a firearm significantly reduce bullet velocity?

According to testing with the BUL Armory Tac Pro, porting resulted in an average velocity loss of approximately 40 feet per second compared to a non-ported barrel of similar length. This difference is considered negligible and does not significantly impact performance.

What is BUL Armory's customer service policy for ammunition-related issues?

BUL Armory offers a service where they will deep clean the barrel of affected firearms at no cost if customers experience issues, particularly from plated ammunition. Customers can send their barrel to their US branch in Florida for this service.

More Tactical & Gear Videos You Might Like

More from Roger Barrera (QVO Tactical)

View all →