Can My Arsenal Defeat a Welder?

Published on February 24, 2023
Duration: 18:31

This video from Autumn's Armory tests the durability of a 110 wire feed welder against various firearms, from .22LR to 10mm and .44 Magnum. The experiment demonstrates how different calibers and bullet types impact and penetrate the welder's casing, with the .44 Magnum ultimately proving most effective at breaching the machine. The video also highlights the performance of specific firearms like the 6-inch Ballistics Envy, an ANT automatic in .22 Magnum, a Browning 380 1911, and a Gen 3 MCK, showcasing their capabilities in a destructive testing scenario.

Quick Summary

The .44 Magnum was the most effective caliber at penetrating the 110 wire feed welder, creating clear exit holes. While smaller calibers like .22LR and .22 Magnum caused damage and lodged bullets, they did not breach the casing. The 9mm, especially with sustained fire, and the 10mm also inflicted significant damage but lacked full penetration compared to the .44 Magnum.

Chapters

  1. 00:00Intro & Welder Setup
  2. 00:45Shooting the 22LR
  3. 01:36Shooting the 22 Magnum
  4. 02:37Shooting the 380 ACP
  5. 03:15Shooting the 9mm MCK
  6. 04:07Shooting the 9mm MCK Mag Dump
  7. 04:59Shooting the 10mm
  8. 05:36Shooting the 44 Magnum
  9. 06:0844 Magnum Second Shot
  10. 06:33Neighbor's 9mm Carbine
  11. 07:08Neighbor's 9mm Carbine Subsonics
  12. 07:29Mag Dump Comparison
  13. 07:51Mag Dump: 10mm
  14. 08:15Mag Dump: 22 Short Auto Mag
  15. 08:44Mag Dump: 9mm MCK
  16. 09:17Post-Test Inspection & Bullet Collection
  17. 10:22Bullet Collection Showcase
  18. 10:34Conclusion

Frequently Asked Questions

Which firearm caliber was most effective at penetrating the welder?

The .44 Magnum proved to be the most effective caliber in penetrating the welder, creating clear exit holes after initial impacts. The 9mm carbine also demonstrated significant penetration with sustained fire.

What types of firearms were tested against the welder?

The test included a 6-inch .22LR, an ANT automatic in .22 Magnum, a Browning 380 1911, a Gen 3 MCK in 9mm, a Rock Island Armory 2011 in 10mm, a Taurus M44 in .44 Magnum, and a 9mm carbine from a neighbor.

Did the smaller caliber rounds penetrate the welder?

Smaller caliber rounds like the .22LR and .22 Magnum caused damage and lodged bullets within the welder but did not achieve full penetration. The 380 ACP also failed to penetrate. The 9mm rounds caused significant damage and some penetration with sustained fire.

What was the purpose of testing firearms against a welder?

The video aimed to test the destructive capabilities of various firearms against a common piece of workshop equipment, the 110 wire feed welder, to see which calibers could breach its casing and internal components.

More from Autumn's Armory

View all →