Hidden Danger of Bedside Gun Stands!..Don't Fall Victim!

Published on April 5, 2026
Duration: 6:18

This video highlights a potential danger associated with bedside gun stands that utilize a peg inserted into the barrel. The primary concern is 'bullet setback' if the peg is too long and repeatedly presses against the bullet in a loaded chamber, potentially over-pressurizing the round. The presenter demonstrates how to check for this issue and showcases a new FiveStar Speed Loader stand as a safer alternative for nightstand storage.

Quick Summary

Bedside gun stands with pegs inserted into the barrel can cause dangerous bullet setback. If the peg is too long and repeatedly presses against the bullet in a loaded chamber, it can over-pressurize the round, potentially leading to a firearm malfunction or explosion when fired.

Chapters

  1. 00:00Introduction: Bedside Gun Stand Danger
  2. 00:26New FiveStar Speed Loader Stand
  3. 01:36The Inherent Danger of Peg Stands
  4. 02:03Demonstrating the Potential Problem
  5. 02:24Testing the Gun on the Stand
  6. 03:09How Bullet Setback Happens
  7. 03:25Bullet Setback in Revolvers
  8. 04:04Conclusion: Safe Nightstand Setup
  9. 04:45New Nightstand Setup Overview
  10. 05:11Final Thoughts on FiveStar Stand

Frequently Asked Questions

What is the main danger of using a peg-style gun stand for a loaded firearm?

The primary danger is 'bullet setback.' If the peg is too long and repeatedly presses against the bullet in a loaded chamber, it can push the bullet deeper into the casing. This can over-pressurize the round, potentially causing a dangerous malfunction or explosion when the firearm is fired.

How can I check if my bedside gun stand is safe for a loaded firearm?

Inspect the peg on your gun stand. If it extends past the forcing cone and makes contact with the bullet in a loaded chamber, it poses a risk. Ideally, the peg should not touch the bullet or should be short enough to avoid this contact entirely.

What is bullet setback and why is it a concern?

Bullet setback is when a bullet is pushed deeper into its cartridge casing. This reduces the case volume, increasing the pressure inside the cartridge when fired. For handguns, especially those with higher pressures, this can lead to dangerous over-pressurization and firearm failure.

Are revolvers more or less susceptible to bullet setback from storage?

While revolvers are generally less prone to bullet setback from normal shooting cycles compared to semi-automatics, improper storage on stands that repeatedly press on the bullet can still introduce this risk. The key is whether the storage method causes consistent pressure on the bullet.

More Tactical & Gear Videos You Might Like

More from TheYankeeMarshal

View all →