How to Zero Your WHISKEY5 Riflescope

Published on November 3, 2017
Duration: 1:46

This guide details how to set the zero stop on a SIG SAUER WHISKEY5 riflescope after zeroing a rifle at 100 yards. It covers the physical steps of removing the turret cap, using the specialized tool to adjust the zero stop ring, and ensuring proper pin alignment. The guide also addresses adjustments needed for rifles mounted on canted rail systems to maintain optical zero.

Quick Summary

Setting the zero stop on a SIG SAUER WHISKEY5 involves removing the turret cap, using the provided tool to turn the zero stop ring counterclockwise until snug, backing it off slightly, and aligning the pin with the ring's cogs. For canted rails, a full clockwise rotation of the turret gear may be necessary before re-zeroing.

Chapters

  1. 00:09Introduction and Scope Model
  2. 00:15Zeroing and Zero Stop Purpose
  3. 00:22Tools Required for Zero Stop
  4. 00:27Removing the Turret Cap
  5. 00:36Using the Zero Stop Tool
  6. 00:58Pin Alignment for Zero Stop
  7. 01:07Reinstalling Turret Cap
  8. 01:13Adjustments for Canted Rails
  9. 01:23Optical Zero Adjustment Procedure
  10. 01:35Further Information and Website

Frequently Asked Questions

How do I set the zero stop on a SIG SAUER WHISKEY5 riflescope?

To set the zero stop, first ensure your rifle is zeroed. Then, remove the turret cap by unscrewing its set screws. Place the zero stop tool over the ring, turn it counterclockwise until snug, back it off slightly, and ensure the pin is between the ring's cogs before replacing the cap.

What is a zero stop on a riflescope?

A zero stop is a feature on some rifle scopes that prevents the elevation turret from being rotated below a specific point, typically the rifle's established zero distance. This helps prevent accidental over-rotation past your zero.

Do I need to adjust my WHISKEY5 scope if I use a canted rail?

Yes, if you mount your WHISKEY5 on a canted rail system (like a 20 MOA rail), you may need to adjust the scope's optical zero. This involves removing the turret and rotating the gear system one full rotation clockwise before re-zeroing the scope.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from SIG SAUER, Inc

View all →