Recreating P320 Failure!..Real World LIVE Testing! (Wyoming Gun project Response Video)

Published on July 27, 2025
Duration: 19:00

This video attempts to recreate a reported Sig Sauer P320 failure where the firearm allegedly discharged without a full trigger pull. The presenter, TheYankeeMarshal, conducts live fire tests to determine if the P320 can be made to fire by partially pulling the trigger to disengage the striker safety and then jostling the firearm. Despite extensive testing, including removing the striker return spring, the presenter is unable to replicate the failure, suggesting the original incident may have involved specific circumstances or modifications.

Quick Summary

The Sig Sauer P320's striker safety can be deactivated with a minimal trigger pull, estimated to be around 0.09 inches. While this allows for a fast trigger, it raises safety concerns if the trigger is obstructed in a holster, as external pressure could disengage the safety and lead to an accidental discharge with subsequent movement.

Chapters

  1. 00:00Introduction and Video Purpose
  2. 00:57Recreating the Reported P320 Failure
  3. 01:40Safety Precautions for Testing
  4. 02:00Deactivating the Striker Safety
  5. 03:03Test 1: No Trigger Pull
  6. 03:39Results: No Trigger Pull
  7. 03:57Test 2: Partial Trigger Pull
  8. 04:14Results: Partial Trigger Pull and Jostling
  9. 04:17P320 AXG vs. Standard P320 Discussion
  10. 04:26Presenter's Concerns with P320 Design
  11. 05:11Striker Drop Tests in Garage
  12. 05:33FBI P320 Failure Rate Discussion
  13. 06:26Inability to Recreate Failure
  14. 06:37Reloading for Another Test
  15. 07:23Final Test: Trigger Pull to Release Sear
  16. 07:51Striker Safety Disengagement Depth
  17. 08:16Safety Concerns with Trigger Travel
  18. 08:43Previous YouTube Strike for Holster Test
  19. 09:04Summary of Test Results
  20. 09:20Analysis of the Reported Failure
  21. 11:23Conditions for Accidental Discharge
  22. 13:16Possibility of Discharge in Holsters
  23. 15:05P320 History and Adoption
  24. 16:17Abusing Firearms to Cause Malfunctions
  25. 17:21Simulating Negligent Discharge Scenario
  26. 17:53Observations from Simulated Discharge
  27. 18:15Doubts About Original Video's Gun/Filming
  28. 18:30Call for Collaboration with Original Video Creator

Frequently Asked Questions

Can the Sig Sauer P320 fire with just a partial trigger pull?

The presenter, TheYankeeMarshal, attempted to recreate a scenario where the Sig Sauer P320 would fire with a partially pulled trigger, just enough to disengage the striker safety, followed by jostling. Despite rigorous testing, including removing the striker return spring, he was unable to induce a discharge, suggesting such failures are unlikely under normal conditions.

How much trigger pull is needed to disengage the striker safety on a Sig P320?

According to the presenter's testing, the Sig Sauer P320's striker safety can be deactivated with a very minimal trigger pull, estimated to be around 0.09 inches, which is less than a tenth of an inch. This short travel is a key point of discussion regarding the firearm's safety.

What are the safety concerns with the Sig Sauer P320 trigger design?

The primary safety concern highlighted is the P320's short trigger travel required to disengage the striker safety. This means that external pressure on the trigger, especially in less secure holsters like nylon ones, could potentially lead to an accidental discharge if the firearm is then jostled or impacted.

Were the P320 failure tests successful in recreating the reported incident?

No, the presenter, TheYankeeMarshal, was unsuccessful in recreating the reported P320 failure where the firearm discharged with a partially pulled trigger and movement. His extensive tests, including modifications, did not result in an accidental discharge, leading him to question the circumstances of the original incident.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from TheYankeeMarshal

View all →