REVIC PMR428 Smart Rifle Scope | Battery Installation

Published on October 29, 2019
Duration: 2:47

This guide details the battery installation process for the Revic PMR428 Smart Rifle Scope. It emphasizes using AAA lithium batteries for optimal performance and longevity over alkaline batteries due to the scope's power consumption. The instructions cover proper battery orientation, O-ring compression for sealing and recoil resistance, and avoiding common installation mistakes like pinching the O-ring.

Quick Summary

For the Revic PMR428 Smart Rifle Scope, AAA lithium batteries are recommended over alkaline due to the scope's high power consumption. Proper installation involves inserting the positive end first, ensuring the rear O-ring compresses against the battery for sealing, and tightening the cap completely to prevent disconnection under recoil.

Chapters

  1. 00:04Introduction to Battery Installation
  2. 00:10Battery Type Discussion (Lithium vs. Alkaline)
  3. 00:15Locating the Battery Box
  4. 01:06Battery Installation Steps
  5. 01:14Polarity Protection Explained
  6. 01:31O-rings and Spring Details
  7. 01:46Compressing the Rear O-ring
  8. 02:02Avoiding O-ring Pinch
  9. 02:19Tightening the Battery Cap
  10. 02:39Conclusion: Revic PMR Battery Installation

Frequently Asked Questions

What type of battery is recommended for the Revic PMR428 Smart Rifle Scope?

For the Revic PMR428 Smart Rifle Scope, AAA lithium batteries are highly recommended. While alkaline batteries can function, they consume power rapidly due to the scope's internal components. Lithium batteries offer significantly longer life, suitable for extended use like multi-day hunts or shooting competitions.

How do I ensure the Revic PMR428 scope's battery compartment is properly sealed?

Proper sealing of the Revic PMR428 battery compartment is achieved by threading the battery cap until the rear O-ring compresses against the battery. This O-ring provides the seal. It's important to allow slight give to accommodate temperature changes and to ensure the O-ring is not pinched during installation.

What happens if I install the battery backward in the Revic PMR428 scope?

The Revic PMR428 Smart Rifle Scope features polarity protection. If you insert the battery backward, the scope simply will not power on. This feature prevents any damage to the internal electronics, but you will need to reinsert the battery with the correct positive end first.

Why is it important to tighten the battery cap completely on the Revic PMR428?

Tightening the battery cap completely on the Revic PMR428 ensures continuous contact with the battery and the internal spring mechanism. This secure connection is vital to prevent the battery from disconnecting under recoil, which could interrupt the scope's functionality during shooting.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Gunwerks

View all →