รีวิว เรดดอท ติดปืนสั้น

Published on April 16, 2020
Duration: 5:34

This guide details the installation and zeroing process for a Vector Optics red dot sight on a Glock 19 Gen 5 MOS pistol. It emphasizes using a dummy laser cartridge for precise alignment and highlights the importance of proper tool usage and firearm safety throughout the procedure. The presenter expresses satisfaction with the optic's performance and clarity.

Quick Summary

The Vector Optics 1F2128 red dot sight is installed on a Glock 19 Gen 5 MOS pistol. Zeroing is achieved by aligning the optic's reticle with the laser from a 9mm dummy cartridge, then adjusting windage and elevation turrets. The presenter praises the optic's sharp, clear red dot.

Chapters

  1. 00:14Introduction: New Red Dot Sight
  2. 00:18Introducing Vector Optics Red Dot
  3. 00:25Mounting on Glock 19 Gen 5 MOS
  4. 00:31Unboxing and Contents
  5. 01:00Red Dot Model: 1F2128
  6. 01:36Installation: Removing Plate Screws
  7. 02:03Red Dot Sight Mounted
  8. 02:13Securing the Red Dot
  9. 02:37Zeroing with Dummy Laser Cartridge
  10. 03:08Aligning Laser and Reticle
  11. 03:15Adjusting Windage and Elevation
  12. 03:48Live Fire Test
  13. 04:00Shooting 5 Rounds
  14. 05:15Final Thoughts and Recommendation
  15. 05:24Contact Information & Website

Frequently Asked Questions

What red dot sight is being reviewed and installed?

The video reviews and installs the Vector Optics red dot sight, specifically model 1F2128. The presenter finds its red reticle to be sharp, clear, and well-defined, offering a good aiming point without being overly large or distracting.

What firearm is the red dot sight being mounted on?

The red dot sight is being mounted on a Glock 19 Gen 5 MOS (Modular Optic System) pistol. The MOS system is designed to facilitate the direct mounting of various optics.

How is the red dot sight zeroed in the video?

The red dot sight is zeroed using a 9mm dummy laser cartridge. The process involves aligning the laser dot with the optic's reticle and then adjusting the windage and elevation turrets on the sight until they are perfectly matched.

What tools are needed to install and zero the red dot sight?

Installation requires the hex key provided with the optic. For zeroing, a flathead screwdriver is needed to adjust the turrets, and a 9mm dummy laser cartridge is used for alignment. The firearm must also be unloaded.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Naaming Kotchanok

View all →