BERETTA 92FS FIELD STRIP

Published on August 24, 2017
Duration: 6:54

This video provides a clear, step-by-step guide on how to field strip and reassemble the Beretta 92FS pistol. It emphasizes safety precautions, such as ensuring the firearm is unloaded, and highlights the specific mechanism for disengaging the slide lock lever. The instructor also briefly touches on cleaning and lubrication using oil wipes.

Quick Summary

To field strip a Beretta 92FS, first ensure it's unloaded. Push the release button on the right side of the frame to flip the disassembly lever down 90 degrees. The slide will move forward, allowing you to remove it. Then, carefully remove the recoil spring and barrel, noting the specific lug mechanism for barrel removal.

Chapters

  1. 00:01Introduction
  2. 00:37Beretta 92FS Overview
  3. 01:11Ensuring Firearm is Unloaded
  4. 01:39Disassembly Lever Mechanism
  5. 02:19Removing the Slide
  6. 02:25Recoil Spring and Barrel Removal
  7. 03:05Barrel Removal Technique
  8. 03:31Field Stripped State
  9. 03:46Cleaning and Lubrication Tips
  10. 04:38Reassembly Steps
  11. 05:06Reinstalling Recoil Spring
  12. 05:17Reattaching Slide to Frame
  13. 05:31Locking the Slide
  14. 05:43Conclusion and Call to Action

Frequently Asked Questions

How do you start field stripping a Beretta 92FS?

Begin by ensuring the magazine is removed and the pistol is completely unloaded. Then, locate the disassembly lever on the left side of the frame and push the release button on the right side to flip the lever down 90 degrees, which will allow the slide to move forward for removal.

What is the difference in barrel removal between a Beretta 92FS and a Glock?

Unlike a Glock where the barrel can often be pulled out, the Beretta 92FS requires you to either lift a small lug on the barrel or press a button on the frame that releases this lug before the barrel can be removed from the slide.

What safety precautions should be taken when removing the recoil spring on a Beretta 92FS?

Be cautious of spring tension when removing the recoil spring assembly. Hold onto it firmly to prevent it from flying across the room, which could cause injury or loss of parts.

What is the trigger system of the Beretta 92FS?

The Beretta 92FS features a Double Action/Single Action (DA/SA) trigger system. This means the first shot can be fired with a long, heavy pull (double action) or a shorter, lighter pull after manually cocking the hammer (single action).

More Training & Techniques Videos You Might Like

More from Locs N Load Firearm Reviews

View all β†’