Official Sig P365 Gun Cleaning Recommendations

Published on May 17, 2023
Duration: 20:08

This comprehensive guide details the official Sig Sauer P365 cleaning and maintenance procedures, as demonstrated by a highly authoritative firearms reviewer. It covers field stripping, cleaning specific components like the slide, barrel, and recoil spring assembly, and proper lubrication points, emphasizing critical areas to avoid lubricating. The guide also includes magazine maintenance and essential reassembly and function checks, utilizing the Otis 9mm cleaning kit.

Quick Summary

The Sig P365 requires specific cleaning procedures. Ensure the firearm is unloaded, field strip by removing the slide, barrel, and recoil spring. Clean slide channels, breech face, and rails, applying light oil only to rails and exterior surfaces. Keep the striker and striker safety dry. Clean the barrel from breech to muzzle, scrub the feed ramp, lightly oil the recoil spring, and wipe down the frame. Reassemble and perform a function check.

Chapters

  1. 00:00Introduction to P365 Cleaning
  2. 00:55Field Stripping the P365
  3. 01:51Otis Cleaning Kit Overview
  4. 03:31Slide Maintenance & Lubrication
  5. 05:57Barrel Cleaning Procedure
  6. 08:46Recoil Spring & Frame Care
  7. 12:10Magazine Maintenance
  8. 16:03Reassembly & Function Check

Frequently Asked Questions

What are the key steps for field stripping the Sig P365 for cleaning?

To field strip the Sig P365, ensure it's unloaded, lock the slide back, rotate the takedown lever, and release the slide. Then, remove the recoil spring assembly and barrel from the slide. Sig does not recommend further disassembly of the grip frame for routine maintenance.

Where should lubrication be applied on the Sig P365 during cleaning?

Apply a light coat of oil to the interior slide rails and the exterior slide surface for corrosion prevention. Lightly oil moving parts on the frame and the recoil spring assembly. Crucially, keep the striker and striker safety area dry.

What specific cleaning tools are recommended for the Sig P365?

The video recommends the Otis 9mm Pistol Cleaning Kit, which includes a cleaning cable, patches, brushes, and a chamber flag that doubles as a bore light. Shooter's Choice FP-10 CLP is used as the cleaning and lubricating agent.

Are there any parts of the Sig P365 that should NOT be lubricated?

Yes, it is critical not to lubricate the striker or the striker safety area. These components must remain dry to ensure the firearm functions correctly and safely.

Related News

All News →

More Training & Techniques Videos You Might Like

More from sootch00

View all →