What Do You Do After You Built Your System? Find It All Right Here Step By Step.

Published on September 8, 2024
Duration: 17:41

This video details the post-setup process for a rifle system, focusing on zeroing the optic and 'slipping the rings' to ensure the scope's zero marks align with the rifle's actual zero. It emphasizes using a chronograph for muzzle velocity, inputting data into a ballistic calculator, and truing the system at a distance near transonic speed for accurate long-range performance. The instructor highlights the importance of developing consistent habits and understanding environmental factors.

Quick Summary

After zeroing your rifle, 'slip the rings' by aligning the scope's zero marks with its physical zero position. Then, chronograph your ammunition for accurate muzzle velocity, input this into a ballistic calculator, and true the system by shooting near transonic speeds to ensure precise long-range performance.

Chapters

  1. 01:46Introduction & Purpose
  2. 02:21Rifle Setup Order
  3. 03:03Zeroing and Ring Slipping Explained
  4. 03:32Chronograph Usage
  5. 04:00Ballistic Calculator Integration
  6. 04:23Truing the Ballistics
  7. 05:19Live Zeroing Demonstration
  8. 07:21Performing the Ring Slip
  9. 08:41Post-Zeroing Summary
  10. 09:15Long Range Truing Session
  11. 10:01Long Range Shot and Adjustment
  12. 11:12Adjusting Ballistic Coefficient
  13. 12:36Altitude Impact on Ballistics
  14. 13:35Rifle Build Details
  15. 16:18Conclusion & Final Thoughts

Frequently Asked Questions

What is the recommended order of operations after setting up a new rifle system?

The recommended order includes zeroing the rifle, then 'slipping the rings' to align scope markings with the actual zero. Following this, measure muzzle velocity with a chronograph and input data into a ballistic calculator, then true the system by shooting at a distance near transonic speed.

How do you properly 'slip the rings' on a rifle scope?

After zeroing your rifle, you remove the scope rings, align their internal zero marks with the scope's windage and elevation zero, and then re-tighten them. This ensures the scope's physical zero corresponds to the rifle's point of impact.

Why is it important to chronograph your ammunition and use a ballistic calculator?

Chronographing provides accurate muzzle velocity, which is critical data for ballistic calculators. These calculators use this data, along with environmental factors, to predict bullet drop and windage holds, enabling precise long-range shooting.

What does it mean to 'true' a ballistic solution, and at what distance should it be done?

Truing a ballistic solution means adjusting your ballistic calculator's parameters (like ballistic coefficient) so that your predicted impact matches your actual point of impact. This should be done at a distance where the projectile is within 10% of its transonic speed for maximum accuracy.

More Training & Techniques Videos You Might Like

More from Weapon Snatcher

View all →