Videos tagged with Point of Aim Point of Impact

Chris from Regular Guy Training explains his handgun zeroing process, emphasizing starting at 3 yards to establish height over bore and windage before moving to the final zero distance (typically 25 yards). He details how to measure and adjust sights, and the importance of understanding personal shooting tendencies for consistent accuracy.

This video explains the concept of mechanical offset (height over bore) and its impact on accuracy at close ranges. It demonstrates how to compensate for the bullet impacting lower than the optic's aim point by aiming higher. The instructor emphasizes confirming your zero and practicing holds on paper to understand your firearm's unique ballistic characteristics.

This video details the process of lapping an AR-15 upper receiver face, a critical gunsmithing step to ensure proper barrel alignment. The instructor demonstrates how to identify an out-of-square receiver face and explains the importance of a flat surface for accurate sight and optic zeroing. Three out of seven tested Ruger AR556 upper receivers required this corrective action.

This video provides a beginner-friendly guide to zeroing an AR-15 rifle, explaining the importance of a zero and demonstrating the process at 25 yards. It covers common zero distances, stable shooting techniques in the prone position, and how to make optic adjustments based on group analysis. The instructor emphasizes understanding ballistic trajectory and practicing at various ranges to master holdovers and holdunders.

This video details the post-setup process for a rifle system, focusing on zeroing the optic and 'slipping the rings' to ensure the scope's zero marks align with the rifle's actual zero. It emphasizes using a chronograph for muzzle velocity, inputting data into a ballistic calculator, and truing the system at a distance near transonic speed for accurate long-range performance. The instructor highlights the importance of developing consistent habits and understanding environmental factors.

This video provides a quick field method to re-zero a Ballistic Drop Compensating (BDC) turret when atmospheric conditions or ammunition lot variations cause a deviation from the original ballistic calculations. The technique involves adjusting the turret to achieve point of aim/point of impact at a key hunting distance and then physically re-aligning the turret's indicator to that distance, ensuring reliable holdovers for the hunt.

This guide details how to effectively zero a pistol red dot sight, emphasizing a progressive approach from 5 to 15 yards. It highlights the importance of using consistent ammunition (115-grain 9mm recommended) and understanding ballistic trajectory. The method involves shooting groups, connecting the bullet holes to find the center, and adjusting the optic accordingly, aiming for pinpoint accuracy between 15-25 yards.

This video provides a complete process for zeroing and 'doping' any rifle, focusing on gathering ballistic data quickly without a chronograph. The instructor details a method applicable to both gas-operated firearms like the AR-15 and bolt-action rifles. A key technique discussed is the usefulness of a 36-yard zero for AR-15 platforms, enabling accurate point of aim/point of impact out to approximately 300 yards. This approach is presented as a reliable solution for shooters who lack access to chronographs.

This video provides a comprehensive guide to sighting in a red dot optic on a Smith & Wesson Equalizer pistol. Instructor John Johnson emphasizes using consistent ammunition, proper grip and stance for two-eyes-open shooting, and making deliberate adjustments based on impact points. He also discusses the importance of sighting in at a sufficient distance and the advantages of red dot optics for quick target acquisition.

Roger Barrera of QVO Tactical provides a brief overview of the Taran Tactical Sand Viper, highlighting three key components he enjoyed. He praises the grip's texture for its effectiveness in hot, sweaty conditions and admires the pistol's aesthetics, particularly the flush-mounted Surefire X300 and fang-like muzzle cut. A significant point of praise is the deep SRO optic cut, which ensures consistent point of aim and point of impact from 5 to 50 yards without the need for holdovers.

Rick Hogg of Warhawk Tactical provides four essential carbine tips. He details a standardized administrative load and unload procedure, emphasizing consistency. The video also covers understanding the point of aim vs. point of impact with red dot sights, the importance of backup iron sights like a leaf front sight post, and an efficient speed magazine change technique.

This guide details a practical method for sighting in a Crimson Trace Laser Guard on a Springfield XD-45, emphasizing a preferred placement behind the front sight. The technique involves establishing a baseline with iron sights at 20 feet and then confirming laser accuracy by focusing solely on the laser dot, ensuring point of aim, point of impact. This approach is presented as a smarter way to zero your handgun laser for effective target acquisition.