2 Hodge 12.5" Barrel Physicals

This video details the process of building a 12.5-inch AR-15 from scratch, covering the selection and installation of various components. The builder emphasizes the importance of choosing quality parts for reliability and performance, demonstrating the assembly of the lower and upper receivers, barrel, handguard, and other essential elements. The build culminates in initial range testing, highlighting areas for potential adjustment like the gas block.

This guide details building a reliable AR pistol, emphasizing component selection for hard-use scenarios. It covers barrel and gas system choices, DI vs. piston considerations, and the importance of quality upper and lower receivers. The build focuses on practical reliability and shooter ergonomics, including ambidextrous controls and essential accessories, with a total cost around $1600 for the base build.

This guide details the process of diagnosing and repairing an owner-induced feeding problem in an AR-15 upper receiver, specifically addressing a burr on the barrel extension's feed ramp. Expert gunsmith Chad Albrecht demonstrates meticulous inspection, burr removal, and polishing techniques to restore reliable feeding. The video emphasizes that such modifications, while often overlooked, are valid solutions for specific AR-15 malfunctions.

This guide details a diagnostic technique for AR-15 bolt carrier groups, focusing on efficiency rather than simple pass/fail. Developed by Chad Albrecht of School of the American Rifle, it uses custom gauges and cutaway components to illustrate gas dynamics, critical seals, and potential failure points like gas leaks. This advanced method helps troubleshoot functionality issues and understand the nuances of the AR-15's internal gas system.

This video provides a critical, expert-level inspection of a problematic AR-15 Bolt Carrier Group (BCG) by Chad Albrecht of School of the American Rifle. The analysis details numerous manufacturing defects, including an undersized bolt tail, excessive firing pin protrusion, oversized firing pin and cam pin holes, and a failing headspace check. The content highlights the importance of precision gauging in identifying critical failure points that impact rifle reliability and safety.

This guide details a specialized technique for swapping an AR-15 rear takedown pin without requiring a full disassembly. It leverages insights from Chad Albrecht of School of the American Rifle, emphasizing the use of a modified 1/16 inch Allen wrench or a specialized tool to manage the detent. This method is particularly useful for AR-15 variants with collapsible stocks, offering a more efficient approach to maintenance.