DIY Bulletproof Tailgate That Works !

Published on May 3, 2021
Duration: 5:27

This video demonstrates a DIY approach to creating a bulletproof tailgate using common materials. The construction involves framing the tailgate, lining it with decking boards, and filling the cavity with approximately 3.5 inches of gravel. The effectiveness of this improvised armor was tested against various calibers, including 9mm, 12 gauge buckshot, 5.56x45mm, and .308 Winchester, with the gravel-filled tailgate successfully stopping all tested rounds. The project aims to provide a functional, albeit improvised, ballistic protection for a truck tailgate.

Quick Summary

A DIY bulletproof tailgate was successfully created by framing the existing tailgate, lining it with decking boards, and filling the cavity with approximately 3.5 inches of gravel. This improvised armor was tested and proven effective against 9mm, 12 gauge buckshot, 5.56x45mm, and .308 Winchester rounds, while maintaining tailgate functionality.

Chapters

  1. 00:00Introduction to DIY Bulletproof Tailgate
  2. 00:20Previous Bulletproof Truck Bed Project
  3. 00:26Design Concept: Thinner Bulletproof Version
  4. 00:30Construction Method: Framing and Gravel Fill
  5. 00:34Goal: Functional and Bulletproof Tailgate
  6. 00:43Initial Setup and Reference Surface
  7. 00:59Assessing the Tailgate Surface
  8. 01:03Identifying Pockets and Holes
  9. 01:12Gravel Depth and Material
  10. 01:17Testing Plan: 9mm First
  11. 01:25Sponsor Shoutout: Stinger USA & Stinger Edge
  12. 01:349mm Test Firing
  13. 02:009mm Test Results: No Penetration
  14. 02:1312 Gauge Buckshot Test
  15. 02:2612 Gauge Test Results: Stopped
  16. 02:315.56x45mm Test Firing
  17. 02:50Additional 5.56x45mm Rounds
  18. 03:045.56x45mm Test Results: Stopped
  19. 03:14308 Winchester Test Firing
  20. 03:28308 Winchester Test Results: Stopped
  21. 03:36Overall Project Success and Limitations
  22. 03:44Angle Shots and Effectiveness
  23. 03:53Summary of Calibers Stopped
  24. 04:05Future Testing Considerations (50 Cal)
  25. 04:11DIY Bulletproof Tailgate Worked
  26. 04:16Safety Warning: Do Not Try This at Home
  27. 04:22Sponsor Recognition: Stinger Edge
  28. 04:32Stinger Edge Product Details: Rail Systems & Glasses
  29. 04:47Stinger Edge Customer Service Story
  30. 04:56Recommendation and Call to Action
  31. 05:03Thank You and Outro

Frequently Asked Questions

How was the DIY bulletproof tailgate constructed?

The DIY bulletproof tailgate was constructed by framing the existing tailgate, lining the interior with decking boards, and then filling the cavity with approximately 3.5 inches of gravel. The goal was to maintain the tailgate's functionality while adding ballistic protection.

What calibers of ammunition did the DIY bulletproof tailgate stop?

The DIY bulletproof tailgate successfully stopped 9mm rounds, 12 gauge buckshot, 5.56x45mm rounds, and .308 Winchester rounds. Even some shots taken at a slight angle were effectively stopped by the gravel-filled construction.

What materials were used to create the bulletproof tailgate?

The primary materials used for the DIY bulletproof tailgate were decking boards for the interior lining and gravel as the ballistic filler material. The existing tailgate structure served as the base.

What are the safety considerations for this DIY project?

The creator strongly advises against attempting this project at home due to the inherent dangers. Proper safety protocols, a controlled range environment, and protective gear are essential when conducting any form of ballistic testing.

More Gunsmithing & DIY Videos You Might Like

More from 704 TACTICAL

View all →