DuraCoat Firearm Finishing Intro by Nutnfancy

Published on January 16, 2009
Duration: 8:02

This guide details the process of applying DuraCoat firearm finishes, as demonstrated by Nutnfancy. It covers essential steps from surface preparation for various metal types to mixing ratios and application techniques using airbrush equipment. The guide emphasizes the 'no-bake' air-dry curing process and highlights DuraCoat's durability compared to standard spray paints. Nutnfancy, an established expert in firearm maintenance, provides practical, DIY-oriented instruction.

Quick Summary

DuraCoat firearm finishes cure via an air-dry process, eliminating the need for baking. Proper surface preparation is crucial: abrade blued/polished metal and degrease Parkerized surfaces. Use an airbrush kit with an air compressor, mixing DuraCoat at a 12:1 paint-to-hardener ratio for durable results.

Chapters

  1. 00:00DuraCoat Application Demo
  2. 00:42Project Introduction: Remington 700 Police Refinish
  3. 01:52DuraCoat Kit Components & Mixing Ratio
  4. 03:32Equipment & Prep Work (Airbrush, Compressor, Scope Prep)
  5. 04:41Curing Process & Surface Prep Details
  6. 06:00Final Thoughts & Cost Comparison

Frequently Asked Questions

What is the recommended mixing ratio for DuraCoat firearm finishes?

The recommended mixing ratio for DuraCoat is typically 12 parts paint to 1 part hardener. Always refer to the specific product instructions for the most accurate ratio to ensure proper curing and durability of the finish.

How should I prepare different firearm surfaces for DuraCoat application?

For blued or polished metal surfaces, mechanical abrasion (like sanding) is necessary for DuraCoat adhesion. Parkerized surfaces primarily require thorough degreasing before application. Proper prep is key to a lasting finish.

What equipment is needed for applying DuraCoat?

Applying DuraCoat typically requires an airbrush kit (like Central Pneumatic) and an air compressor (such as a Craftsman 125 PSI model) to achieve an even and professional finish. Ensure the compressor provides consistent air pressure.

Does DuraCoat require baking to cure?

No, DuraCoat is a 'no-bake' finish. It cures through an air-dry process. This makes it a convenient option for DIY firearm refinishing projects without needing specialized ovens.

More Gunsmithing & DIY Videos You Might Like

More from nutnfancy

View all →