Fitting N-Frame Grips onto a K/L FRame Revolver?

Published on September 28, 2020
Duration: 4:58

This guide details how to modify N-frame revolver grips for a proper fit on K/L-frame revolvers, specifically addressing the common issue of the grips extending too far back. The process involves tracing the K/L-frame's grip geometry onto the N-frame grips, sanding down the excess material flat, then smoothing and rounding the edges. The instructor emphasizes sanding flat first before rounding for a cleaner finish and suggests using tung oil for sealing.

Quick Summary

To fit N-frame grips onto a K/L-frame Smith & Wesson revolver, trace the K/L-frame's grip outline onto the protruding areas of the N-frame grips. Sand the excess material flat to the line, then smooth and round the edges for a clean finish. This modification allows for a custom fit on your revolver.

Chapters

  1. 00:00Introduction & Conversation
  2. 00:40Customer's Revolver Choice (S&W 686)
  3. 01:17Beautiful African Walnut Grips
  4. 01:45N-Frame Grips on K/L-Frame Issue
  5. 03:09Sanding N-Frame Grips for K/L-Frame Fit
  6. 04:25Finishing and Sealing Grips

Frequently Asked Questions

Can you put N-frame grips on a K/L-frame Smith & Wesson revolver?

Yes, you can fit N-frame grips onto a K/L-frame Smith & Wesson revolver, but they will require modification. The N-frame grip frame is slightly longer, causing the grips to protrude. This protrusion can be sanded down to match the K/L-frame's geometry for a custom fit.

How do you modify N-frame grips to fit a K/L-frame revolver?

To modify N-frame grips for a K/L-frame revolver, first place the grips on the gun. Trace the outline of the K/L-frame's grip onto the protruding areas of the N-frame grips. Then, sand down the excess material flat to the traced line before smoothing and rounding the edges.

What tools are needed to fit N-frame grips onto a K/L-frame revolver?

You will need basic tools like a pencil or fine-point marker for tracing, sandpaper (150 and 500 grit recommended) for shaping, and a hand file for initial material removal. Tung oil is used for finishing, and steel wool can help with final smoothing.

What is the main difference between N-frame and K/L-frame grip geometry?

The primary difference is that the N-frame's grip extends slightly further back than the K/L-frame's. This means that when N-frame grips are installed on a K/L-frame, the top wings and a portion of the back strap will stick out beyond the actual frame of the K/L-frame revolver.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from TheYankeeMarshal

View all →