How To Clean And Lubricate A CZ-75 Series Handgun (HD)

Published on October 26, 2015
Duration: 15:03

This comprehensive guide details the field stripping, cleaning, and lubrication process for CZ-75 series handguns, including models like the SP-01. Presented by Mrgunsngear, a recognized firearms instructor, the tutorial emphasizes a methodical approach suitable for beginners. Key steps include detailed cleaning of the breach face and extractor, precise lubrication of friction points with a needle-oiler, and a final function check to ensure proper operation.

Quick Summary

This guide details cleaning and lubricating CZ-75 series handguns. After field stripping, clean the barrel with CLP and patches, scrub the frame and slide with a toothbrush, and meticulously clean the breach face and extractor. Lubricate key friction points like slide rails and barrel lugs with a needle-oiler, then reassemble and perform a function check.

Chapters

  1. 00:00Introduction to CZ-75 Cleaning
  2. 00:56Supplies Needed
  3. 03:05Disassembly (Field Stripping)
  4. 04:05Cleaning the Barrel and Slide
  5. 05:29Scrubbing and Wiping
  6. 10:32Detailed Cleaning (Breach Face, Extractor)
  7. 11:33Lubrication
  8. 13:17Reassembly and Function Check

Frequently Asked Questions

What are the essential supplies for cleaning a CZ-75 series handgun?

You'll need cut-up t-shirt patches, polymer picks to avoid scratching, a cleaning rod, a toothbrush for scrubbing, Break-Free CLP for cleaning and lubrication, and a needle-oiler for precise application.

How do you field strip a CZ-75 for cleaning?

After a safety check, pull the slide back to align disassembly notches, push out the slide stop using the magazine base plate, then remove the slide, recoil spring, guide rod, and barrel.

Where should lubricant be applied when cleaning a CZ-75?

Apply lubricant to key friction points: the barrel lugs, the exterior of the barrel where wear is visible, the slide rails, and the hammer spring. Use a needle-oiler for precision.

What are common mistakes to avoid when cleaning a CZ-75?

Avoid using excessive force or metal tools that can scratch the finish. Also, prevent over-lubrication, as it can attract dirt and cause malfunctions. Clean the breach face and extractor thoroughly.

More Gunsmithing & DIY Videos You Might Like

More from Mrgunsngear Channel

View all →