How To Clean & Lubricate A Ruger Security 9 Handgun

Published on June 2, 2019
Duration: 8:32

This guide provides expert-level, step-by-step instructions on how to clean and lubricate a Ruger Security 9 handgun, as demonstrated by an experienced instructor. It covers proper disassembly, cleaning techniques using specific products like Break-Free CLP, and reassembly with a crucial function check. The video emphasizes safety and practical advice for maintaining the firearm's reliability.

Quick Summary

Learn how to properly clean and lubricate your Ruger Security 9 handgun with this expert guide. It covers safe disassembly, using Break-Free CLP for cleaning and lubrication, reassembly, and performing a vital function check to ensure reliability.

Chapters

  1. 00:07Introduction & Purpose
  2. 00:25Cleaning Supplies Overview
  3. 00:59Safety Check & Disassembly Prep
  4. 01:18Field Stripping the Pistol
  5. 01:47Cleaning the Barrel & Bolt
  6. 02:28Cleaning the Slide & Frame
  7. 03:18Wiping Down Parts
  8. 04:44Final Cleaning & Guide Rod
  9. 05:26Lubrication
  10. 06:38Reassembly & Function Check
  11. 07:18Closing Remarks

Frequently Asked Questions

What are the essential steps to clean a Ruger Security 9?

Begin by ensuring the pistol is unloaded. Field strip it by removing the slide, guide rod, and barrel. Clean the barrel with CLP on a patch, then clean the slide and frame, focusing on rails and breech face. Wipe down all parts, reassemble, and perform a function check.

What cleaning products are recommended for the Ruger Security 9?

The video recommends Break-Free CLP for cleaning, lubricating, and preserving the firearm. Tipton polymer cleaning picks are suggested for cleaning to avoid scratching the finish, and standard cleaning rods and patches are used for the barrel.

How do you lubricate a Ruger Security 9 after cleaning?

Apply a small amount of CLP to areas showing wear, such as slide rails, barrel locking lugs, and the feed ramp. Spread the lubricant with your finger or by cycling the action after reassembly.

What is a crucial safety step before cleaning a handgun?

The most critical safety step is to ensure the firearm is completely unloaded. This involves removing the magazine and visually and physically confirming that there is no round in the chamber.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Mrgunsngear Channel

View all →