How To Disassemble, Clean & Lubricate A Beretta PMXs

Published on May 3, 2024
Duration: 14:15

This guide details the disassembly, cleaning, and lubrication process for the Beretta PMX/PMXS pistol. It emphasizes using CLP as a cleaner and lubricant, along with common tools like a toothbrush and polymer picks. The process involves removing a takedown pin, separating receivers, and disassembling the bolt and recoil assembly for thorough cleaning before reassembly and a function check.

Quick Summary

To clean and lubricate your Beretta PMX, first ensure it's unloaded. Disassemble by removing the takedown pin, separating receivers, and removing the bolt and recoil spring. Use CLP with a toothbrush and polymer picks for cleaning, focusing on the barrel, bolt face, and receiver. Reassemble carefully and perform a function check.

Chapters

  1. 00:11Introduction and Tools
  2. 01:27Magazine Drop and Safety Check
  3. 01:34Takedown Pin Removal
  4. 01:57Upper and Lower Receiver Separation
  5. 02:21Rear Piece Removal
  6. 02:38Recoil Spring and Bolt Removal
  7. 03:10Barrel Cleaning
  8. 04:08Receiver and Bolt Cleaning
  9. 05:13Lower Receiver and Trigger Group Cleaning
  10. 05:50Wiping Down Components
  11. 09:20Lubrication: Bolt and Guide Rod
  12. 10:16Reassembly: Bolt and Guide Rod
  13. 11:33Reassembly: Upper and Lower Receivers
  14. 12:38Function Check
  15. 12:54Outro and Channel Information

Frequently Asked Questions

What are the essential tools for cleaning a Beretta PMX?

For cleaning a Beretta PMX, you'll need CLP (Cleaning Lubricant and Protectant), t-shirt pieces or patches, a toothbrush, a punch and hammer for pins, and a polymer pick set for detailed areas. An Otis cord can be useful for cleaning the 9mm barrel.

How do you disassemble the Beretta PMX?

Disassembly involves removing the magazine, clearing the chamber, driving out the takedown pin, separating the upper and lower receivers, unscrewing the rear piece, and removing the recoil spring and bolt assembly by aligning the bolt to a specific notch.

What is CLP and why is it used for firearm cleaning?

CLP stands for Cleaning Lubricant and Protectant. It's a versatile product used by the US military for decades because it effectively cleans away carbon, lubricates moving parts, and provides protection against corrosion, simplifying firearm maintenance.

What are key areas to focus on when cleaning the Beretta PMX?

Key areas to focus on include the barrel, especially the feed ramps, the bolt face, the extractor, and inside the receiver and trigger group. Use a toothbrush and polymer picks to ensure all carbon buildup is removed from these critical components.

More Gunsmithing & DIY Videos You Might Like

More from Mrgunsngear Channel

View all →