Lee Classic Turret Press Setup PART 2

This guide details the setup and installation of the powder measure assembly for the Frankford Arsenal X-10 progressive press. It emphasizes thorough cleaning of packing lubricants using dish detergent and water, with a specific technique to prevent powder cling by not rinsing. The process includes identifying and installing the correct powder charging tube for different case lengths, reassembling the powder measure components, and mounting it onto the press. Key steps involve careful handling of spring-loaded parts and proper alignment of the powder damper.

This video demonstrates the process of handloading 120-grain Speer Gold Dot ammunition for the 6.5 Grendel cartridge using a Lee Classic Turret Press. It focuses on the practical application of reloading specific components for a particular caliber, highlighting the equipment and steps involved in creating custom ammunition. The content is geared towards individuals interested in firearm reloading and cartridge development for calibers like the 6.5 Grendel.

This guide details how to reload ammunition as a cost-effective solution to current market shortages, drawing insights from a firearms instructor. It covers the cost analysis of reloading .40 S&W, highlighting savings of over 14 cents per round compared to factory loads. The process is presented as a practical method for ensuring a personal ammunition supply, with a focus on the straightforward nature of pistol reloading.

This guide details the setup of the Lee Pro Auto-Disk powder measure for .223 Remington loads on a Classic Turret Press. It emphasizes selecting the correct double disc combination based on volume charts to achieve precise powder charges, specifically 1.86 cc for a 55-grain bullet with H4895 or Varget. The process includes proper disc orientation, assembly, and emptying procedures, with a strong emphasis on safety and double-checking all measurements.

This video provides a fundamental guide to reloading pistol cartridges, specifically the .44 Special, using a Lee Classic Turret Press. Steve Ostrem demonstrates a four-step process: sizing and de-priming, priming, expanding the case neck and dispensing powder, and finally, seating and crimping the bullet. The tutorial emphasizes safety with eye protection and highlights the press's suitability for small batches.

This guide details the setup of the bullet seating die on a Lee Classic Turret Press. It covers indexing the seating stem, properly threading and adjusting the die to avoid unwanted crimping, and the process of seating a bullet to a specific cartridge overall length (COL). The instructor emphasizes using manufacturer specifications for COL and being conservative with adjustments.

This guide, drawing on decades of experience, details how to achieve rifle accuracy. It covers defining accuracy standards, understanding MOA, troubleshooting mechanical issues like loose sights and barrel contact, and optimizing bedding and muzzle conditions. The instruction emphasizes practical application for hunters and marksmen, highlighting that modern accuracy benchmarks have evolved significantly.

This guide provides expert-level instructions for disassembling, cleaning, and maintaining the Ruger 10-22 Walnut Sporter, drawing on detailed insights from GunBlue490. It emphasizes critical steps like safely removing the action from the stock to protect the walnut finish and proper cleaning techniques to ensure long-term reliability. The instruction highlights the importance of using appropriate tools and avoiding common mistakes like over-oiling the wood stock.

This video provides a detailed guide on disassembling and cleaning a Smith & Wesson Model 25 revolver, presented by a factory-trained armorer. It emphasizes proper nomenclature, tool usage, and careful handling of internal parts to avoid damage. The guide covers removing stocks, yoke, side plate, hammer, rebound slide, and trigger, with specific instructions on reassembly and common pitfalls to avoid, such as altering trigger pull components or damaging delicate parts.

This guide, presented by an expert with over 30 years of experience and U.S. Army background, details proper firearm lubrication. It emphasizes using synthetic/CLP oils sparingly, applying only a microscopic film to prevent attracting debris. The expert recommends a silicone-treated rag for regular wipe-downs and advises against over-oiling, especially in extreme environmental conditions.