M1941 Johnson Field Strip

Published on November 20, 2015
Duration: 2:49

This guide details the simple field stripping procedure for the M1941 Johnson rifle, as demonstrated by Alex C. of TFBTV. The process primarily involves disengaging a lever under the barrel to remove it from the receiver. This minimal disassembly is recommended for cleaning due to the rifle's recoil-operated system, which prevents excessive gas buildup in the receiver.

Quick Summary

Field stripping the M1941 Johnson rifle is a simple process involving a lever under the barrel. Pressing this lever with a pointed object while pushing the barrel in allows for its removal from the receiver, making cleaning straightforward due to its recoil-operated system.

Chapters

  1. 00:00Introduction to M1941 Johnson Rifle
  2. 00:20Recoil Operated Mechanism Explained
  3. 00:43Criticisms: Bayonet Mount
  4. 01:04Advantages: Top-Off Loading & Capacity
  5. 01:28Field Stripping Procedure Start
  6. 01:37Using a Bullet Tip to Release Lever
  7. 01:51Barrel Removal
  8. 02:03Simplicity of Field Strip
  9. 02:14Bolt Design and AR-15 Comparison
  10. 02:25Conclusion and Future Content

Frequently Asked Questions

How do you field strip the M1941 Johnson rifle?

Field stripping the M1941 Johnson rifle is straightforward. You need to locate a lever under the barrel in the fore-end. Press this lever with a pointed object, like a bullet tip, while pushing the barrel in slightly. This disengages the lever, allowing you to remove the barrel from the receiver.

Why is the M1941 Johnson rifle considered simple to field strip?

The M1941 Johnson rifle is considered simple to field strip because the recommended procedure for cleaning only involves removing the barrel from the receiver. This is facilitated by its recoil-operated system, which doesn't require extensive disassembly for basic maintenance.

What are some notable features of the M1941 Johnson rifle?

The M1941 Johnson is a recoil-operated firearm that served alongside the M1 Garand in WWII. It features a ten-round capacity, can be topped off with clips, and its bolt design influenced later firearms like the AR-10. A drawback was its inability to mount heavy bayonets.

More Gunsmithing & DIY Videos You Might Like

More from TFB TV

View all →