neeeeeeeed

This expert-level guide details the step-by-step disassembly of the Ruger 10/22 rifle, as demonstrated by a Ruger firearms instructor. It emphasizes crucial safety precautions, lists the necessary tools (a 5/32 Allen key and a small punch), and walks through removing the action screw, separating the stock, and disassembling the receiver components. This procedure is essential for proper cleaning and maintenance of the popular .22 LR rifle.

This guide details the field stripping and cleaning process for the Ruger 10/22 Carbon Fiber, as demonstrated by sootch00. It covers removing the action and bolt for cleaning, reassembly, and a crucial safety check. The video highlights the rifle's lightweight design and the ease of maintenance, even with aftermarket components like the Magpul X-22 stock and BX-Trigger.

This video details a comprehensive makeover of a Ruger 10/22, specifically model 320224, focusing on upgrading the stock and trigger. The host, Gavin Gear from Ultimate Reloader, installs a WOOX Exactus stock made of American walnut with an aluminum center section and MLOK forend, and a Kid Industries drop-in trigger that reduces pull weight to 1.5 lbs. The process involves removing the original Hogue stock and BX trigger, then installing the new components. The upgraded rifle demonstrates exceptional accuracy, achieving a 0.211-inch five-shot group at 50 yards with a suppressor.

This guide details the basic maintenance and cleaning procedures for the Ruger 10/22 and similar platforms like the Brownells BRN-22, as demonstrated by Caleb from Brownells. It covers safe disassembly, thorough cleaning of key components including the bolt and receiver, proper lubrication points, and a critical function check post-reassembly. The instruction emphasizes careful handling to protect critical parts like the barrel crown for sustained accuracy.

This video details the installation of the Mars FRT (Force Reset Trigger) into a Ruger 10/22. The presenter, 22 Plinkster, explains that the FRT is not a full-auto sear but a mechanism that resets the trigger as the bolt cycles forward, allowing for a high rate of fire. The installation involves using the factory trigger pack housing and is described as a relatively simple process taking about 10 minutes, with no permanent alterations to the firearm.

This YouTube video showcases a significant transformation of a Ruger AMERICAN rifle. The title indicates a "radical change" that viewers need to see, suggesting a deep dive into modifications, upgrades, or a complete overhaul of the firearm. Given the focus on altering a specific rifle model, expect discussions around customization, parts, and potential performance improvements. This content is geared towards firearm enthusiasts interested in custom builds and enhancing their existing firearms.

This guide details how to properly zero a red dot sight on a 9mm handgun, based on expert instruction. It emphasizes understanding mechanical offset and ballistic trajectory. The video advises against zeroing at very close distances like 5 yards, recommending a 15-yard zero for 9mm handguns as it provides a more predictable point of impact at common engagement distances, typically around 50 yards.

This guide details the unique top-loading process for the Kel-Tec P50 pistol using stripper clips, as demonstrated by Shortshot Tony. It covers loading 20 rounds of 5.7x28mm ammunition and highlights the firearm's exceptionally lightweight design and minimal recoil during firing, offering a practical overview for potential users.

This video from SHORTSHOT TONY provides practical advice on defensive target selection, emphasizing aiming for the pelvic girdle rather than the head or center mass when facing threats potentially wearing body armor. The instructor, identified as a firearms enthusiast with practical shooting experience, humorously but directly explains the tactical advantage of targeting the pelvis to immobilize an opponent. The demonstration utilizes a 2011-style pistol equipped with a red dot optic.

SHORTSHOT TONY, an experienced tactical content creator, explains the proper use of red dot sights and iron sights. He emphasizes that co-witnessing is for backup purposes, not simultaneous aiming, and that red dots are parallax-free. Tony advises against aligning the red dot with irons for every shot, suggesting it's a misuse of the optic's capabilities and potentially a waste of money if not utilized correctly.