The Power of .300 Win Mag vs Thick Wood - TheFireArmGuy

Published on July 12, 2016
Duration: 3:29

This guide details a penetration test using a Sig SHR 970 rifle chambered in .300 Win Mag, firing Winchester 180 grain Ballistic Silvertip rounds through stacked 2-inch thick wood boards at 50 yards. The test, conducted by an experienced firearms reviewer, demonstrates the significant power of the .300 Win Mag cartridge. Safety precautions are paramount throughout the process.

Quick Summary

An expert firearms reviewer tested the penetration power of the .300 Win Mag caliber using a Sig SHR 970 rifle and Winchester 180-grain Ballistic Silvertip ammunition. The rounds were fired at dense wood targets at 50 yards, successfully penetrating through 4 inches and reaching approximately 5 inches into a third 2-inch board.

Chapters

  1. 00:00Introduction to Sig SHR 970 & .300 Win Mag
  2. 00:27Ammunition: Winchester 180gr Ballistic Silvertip
  3. 00:42Target: 2-inch Dense Wood Setup
  4. 01:06Test 1: Penetration through 2" Wood
  5. 01:49Test 2: Penetration through 4" Wood
  6. 02:19Test 3: Penetration through 6" Wood
  7. 02:51Final Assessment of .300 Win Mag Power

Frequently Asked Questions

What rifle and caliber were used in the wood penetration test?

The test utilized a Sig SHR 970 bolt-action rifle chambered in the powerful .300 Win Mag caliber. This rifle is known for its performance and was paired with specific ammunition for the test.

What type of ammunition was tested for penetration through wood?

The ammunition used was Winchester 180-grain Ballistic Silvertip .300 Win Mag rounds. This specific load was chosen for its demonstrated power and effectiveness in penetration tests.

How much wood did the .300 Win Mag round penetrate?

In the test, the .300 Win Mag round successfully penetrated through 4 inches of dense wood and reached approximately 5 inches into a third 2-inch board, demonstrating significant energy transfer.

What was the target setup for the penetration test?

The target consisted of stacked pieces of dense wood, each 2 inches thick. The test progressed from a single board (2 inches) to two boards (4 inches) and then three boards (6 inches) to assess penetration capabilities.

Related News

All News →

More Hunting & Outdoors Videos You Might Like

More from TheFirearmGuy

View all →