Part 2 New Conceal Carry Tips | Using the Right Loctite

Published on June 19, 2025
Duration: 2:34

This guide explains the critical step of applying Loctite to holster adjustment screws to prevent them from loosening over time. It emphasizes using removable blue Loctite and applying it sparingly to just a few threads. Proper Loctite application ensures consistent retention and prevents parts from falling off, maintaining the reliability of your concealed carry setup.

Quick Summary

Applying removable blue Loctite to your EDC or duty holster screws is crucial for preventing them from loosening due to vibration. Use just a small amount on 3-4 threads to ensure consistent retention and prevent parts from falling off, maintaining reliable firearm access.

Chapters

  1. 00:00Introduction to Holster Setup and Loctite
  2. 00:20Why Holsters Need Loctite
  3. 00:55The Problem of Loose Holster Screws
  4. 01:11How to Apply Loctite to Screws
  5. 01:34Correct Amount of Loctite
  6. 01:59Choosing the Right Loctite (Blue vs. Red)
  7. 02:14Consequences of Using Permanent Loctite
  8. 02:27Final Recommendations

Frequently Asked Questions

Why is it important to use Loctite on concealed carry holster screws?

Using Loctite on holster screws prevents them from loosening due to vibration and movement during daily carry. This ensures consistent retention, preventing parts from falling off and maintaining the reliable function of your holster for safe firearm access.

What type of Loctite should be used for holster adjustments?

Removable blue Loctite is the recommended type for holster screws. It provides sufficient threadlocking to prevent loosening but allows for disassembly if adjustments or maintenance are needed in the future without damaging the hardware.

How much Loctite should be applied to holster screws?

Only a small amount of Loctite is needed, typically applied to 3-4 threads of the screw. Rolling the applicator over the threads is usually enough; avoid coating the entire screw to prevent excess material from caking up or leaking.

What happens if permanent (red) Loctite is used on holster screws?

Using permanent red Loctite can make holster screws extremely difficult to remove. This can lead to stripped screws or damage to the holster itself, creating a significant hassle if you ever need to adjust or repair your gear.

More Tactical & Gear Videos You Might Like

More from Geauga Firearms Academy

View all →