The Lima 6 Belt Fed Shorty is SICK!

Published on June 23, 2026
Duration: 15:03

This video provides an in-depth look at the Lima 6 belt-fed shorty upper receiver, detailing its setup and operational quirks. The presenter, with experience from approximately 1700 rounds, highlights the importance of proper ammunition link seating, safe clearing procedures for closed-bolt systems, and heat management techniques, particularly concerning the charging handle. It also touches on accessory choices and potential issues with certain ammunition feeding devices.

Quick Summary

Operating a Lima 6 belt-fed firearm requires attention to heat management and malfunction clearing. Always use gloves as the charging handle gets extremely hot. For malfunctions, cycle the charging handle to ensure the bolt is in battery before attempting standard clearing procedures to avoid double feeds.

Chapters

  1. 00:00Intro: Lima 6 Belt Fed Shorty
  2. 01:05Setup and Components
  3. 03:06Ammunition Link Issues
  4. 04:07Malfunction Handling
  5. 04:50Feed Pouch Capacity Issues
  6. 06:04Gas Block and Accessories
  7. 06:34Heat Management & Gloves
  8. 07:00Charging Handle Heat Transfer
  9. 07:23Safe Clearing Procedures
  10. 08:53Direct Impingement & Barrel
  11. 09:34Closed Bolt vs. Open Bolt Explained
  12. 11:00Recoil Comparison
  13. 13:00Final Thoughts & Future Videos

Frequently Asked Questions

What are the key safety considerations when operating a Lima 6 belt-fed firearm?

Always wear heat-resistant gloves due to the charging handle getting very hot. When clearing, point the muzzle safely, cycle the charging handle, and cautiously open the feed tray to visually confirm the chamber is empty. Ensure the bolt is locked to the rear before closing the feed tray cover.

What common issues can arise with ammunition links for belt-fed firearms like the Lima 6?

Some ammunition links may not seat rounds positively, leading to rounds sticking out. This can cause malfunctions. It's crucial to inspect links and ensure rounds are properly seated before feeding them into the firearm.

How should one handle a malfunction with a closed-bolt belt-fed system?

If a malfunction occurs, try cycling the charging handle forward to ensure the bolt is fully in battery. This can prevent double feeds, which are common if you immediately resort to a standard AR 'tap rack bang' without checking the bolt's status.

What is the main drawback of the Lima 6's charging handle?

The charging handle is directly attached to the bolt carrier, meaning it absorbs and transfers heat rapidly. After firing a significant number of rounds, it can become too hot to touch without gloves, posing a burn risk.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Juicey Media

View all →