เทคนิคยิง​เปลี่ยน​ระยะ200เมตร กล้อง​เล็ง​ แบรนด์​ NAAMING​ HD​ 4-16x44​

Published on May 26, 2023
Duration: 6:59

This video provides an expert-level guide to engaging targets at extended ranges (up to 200 meters) using a .22 LR rifle and the NAAMING HD 4-16x44 SFIR scope. Naaming Kotchanok, demonstrating high authority, explains and demonstrates two key techniques: reticle holdover and turret dialing. The instruction covers zeroing at 50 meters and applying specific holdover points or turret adjustments for 100, 150, and 200 meters, emphasizing accuracy and proficiency.

Quick Summary

Expert long-range shooting techniques up to 200 meters are demonstrated using a CZ 457 Jaguar rifle and NAAMING HD 4-16x44 SFIR scope. The video covers zeroing at 50 meters and mastering both reticle holdover and turret dialing methods for accurate engagement at various distances.

Chapters

  1. 00:26Introduction & Objectives
  2. 00:41NAAMING Scope Overview
  3. 01:03Setup & Methodology
  4. 01:38Holdover Technique Demo
  5. 03:11Dialing Technique Demo

Frequently Asked Questions

What are the two main techniques for long-range shooting demonstrated in the video?

The video demonstrates two primary techniques: reticle holdover, which uses specific marks on the scope's reticle for different distances, and turret dialing, where the scope's elevation turret is adjusted to compensate for bullet drop at each range.

How is the NAAMING HD 4-16x44 SFIR scope used for 200-meter shooting?

The NAAMING HD 4-16x44 SFIR scope is used by either applying a specific MIL holdover mark (e.g., 6.5 MIL) or dialing the elevation turret to a calculated value (e.g., 6.5) to compensate for the bullet's trajectory at 200 meters.

What rifle and caliber are used for the 200-meter shooting demonstration?

The demonstration utilizes a CZ 457 Jaguar rifle chambered in .22 LR caliber. This combination proves effective for accurate shooting at extended distances when paired with the appropriate optics and techniques.

What is the significance of the '1 CLICK = 1/10 MIL' marking on the scope turret?

This marking indicates the precision of the scope's adjustment system. Each click of the turret moves the point of impact by 1/10th of a milliradian, allowing for fine-tuning and accurate ballistic compensation.

More Training & Techniques Videos You Might Like

More from Naaming Kotchanok

View all →