How to use an AK47 Drum Loading Instructions

Published on January 31, 2012
Duration: 4:25

This guide details the process of loading and preparing a 75-round AK47 drum magazine. It covers opening the drum, winding the mechanism, properly seating ammunition, and the correct number of turns for storage versus immediate use. The video emphasizes relieving tension for storage and winding to seven turns for firing, with instructions on how to de-tension the magazine for later use.

Quick Summary

To properly load an AK47 drum magazine, wind the mechanism clockwise while holding the center button. Load three rounds into the neck, then continue filling the body. For storage, apply two turns; for firing, a total of seven turns are needed. Relieve tension by pressing the button, then reapply two turns for storage.

Chapters

  1. 00:00Introduction: Empty Magazine
  2. 00:07Opening the Drum Magazine
  3. 00:17Relieving Tension
  4. 00:23Winding the Drum Assembly
  5. 00:32Initial Round Loading
  6. 00:42Loading Rounds into the Neck
  7. 01:11Filling the Drum Magazine
  8. 01:54Post-Loading Checks
  9. 02:15Storage vs. Firing Tension
  10. 02:25Total Turns for Firing
  11. 03:00Relieving Tension for Storage
  12. 03:16Demonstration: Firing the Drum
  13. 03:52Summary: 75-Round Drum Basics
  14. 04:04Ready to Load Again
  15. 04:13Different Drum Types

Frequently Asked Questions

How do you properly store an AK47 drum magazine?

For indefinite storage, it's recommended to leave the AK47 drum magazine with two turns of tension on the winding mechanism. This provides enough pressure to hold the rounds securely without over-stressing the internal components.

What is the correct number of turns for an AK47 drum magazine before firing?

Before firing, an AK47 drum magazine should have a total of seven turns applied to its winding mechanism. This includes any turns already present from storage, so you may need to add more turns.

How do you relieve tension on a loaded AK47 drum magazine?

To relieve tension, pop the tabs on the back of the drum, press the center button to release the spring tension, and then reapply two turns for storage. Releasing all tension will cause rounds to fall out.

What are the initial steps for loading an AK47 drum magazine?

Start by ensuring the magazine is empty and the follower is at the top. Open the drum by popping the back tabs and press the center button to relieve any tension before winding the assembly clockwise.

Related News

All News →

More Training & Techniques Videos You Might Like

More from Iraqveteran8888

View all →