PATREON SHORTS - Zeroing Your Laser

Published on December 13, 2024
Duration: 8:45

This guide details the process of zeroing a laser aiming module (LAM) to co-witness with an EOTech optic on a Cobalt Kinetics rifle, as demonstrated by GBRS Group. The expert instruction emphasizes achieving a unified point of aim and impact for both the optic's reticle and the laser, crucial for effective target engagement, especially in low-light conditions. It covers practical steps from initial alignment to fine-tuning and confirms the importance of zeroing with accessories like suppressors attached.

Quick Summary

Zeroing a laser aiming module (LAM) involves aligning its point of impact with your red dot optic's reticle, often using the 'dot-over-dot' method at 25 yards. This co-witnessing ensures a unified aiming point. It's crucial to confirm zero with live fire and to zero with accessories like suppressors attached, as they can affect point of impact.

Chapters

  1. 00:04Intro & Zero Confirmation
  2. 00:16Laser Co-witnessing Process
  3. 00:36Laser-Only Operation & Power
  4. 00:52Independent Laser Zeroing
  5. 01:08Co-witnessing Philosophy
  6. 01:21Zero Distances & Hold-offs
  7. 01:38Live Fire Zero Confirmation
  8. 01:50Target Analysis - Initial Shots
  9. 02:27Fine-tuning Laser Zero
  10. 02:45Suppressor Testing & Impact
  11. 03:20Bore Sighting vs. Live Fire
  12. 04:02Red Dot Adjustment Best Practice
  13. 04:34Live Fire Post-Adjustment
  14. 04:50Target Review - Laser Grouping
  15. 05:22Attaching Suppressor (Can)
  16. 05:43Target Review - Suppressor Impact
  17. 06:38Importance of Consistent Zero
  18. 06:54HUXWRX Suppressor Feedback
  19. 07:11Live Fire with Suppressor
  20. 07:45Final Suppressor Grouping & Satisfaction
  21. 08:08Next Steps: IR Flood Zeroing

Frequently Asked Questions

How do you co-witness a laser aiming module with a red dot optic?

To co-witness, align the laser's point of impact directly with the red dot reticle at a close distance, typically 25 yards. This 'dot-over-dot' method ensures both aiming systems share a common point of aim and impact, simplifying target engagement.

What is the best practice after adjusting a red dot optic?

After making adjustments to a red dot optic, it's recommended to gently tap the optic. This helps the internal components settle, ensuring a stable zero and preventing potential deviations in the first few shots fired.

Should you zero your laser with a suppressor attached?

Yes, it is highly recommended to zero your laser aiming module with your suppressor attached if you intend to use them together. Suppressors can alter the firearm's point of impact, so zeroing with the suppressor ensures accuracy.

What is the advantage of co-witnessing a laser over an offset zero?

Co-witnessing a laser with a red dot optic is preferred because it offers a single memorized hold-off point for both aiming systems, simplifying target engagement. An offset zero requires learning different hold-offs for each system.

More Training & Techniques Videos You Might Like

More from GBRS Group

View all →