PROOF That Alec Baldwin LIED?! (Gun Demonstration)

Published on December 7, 2021
Duration: 8:26

This guide details a firearm demonstration focused on the mechanics of a Single Action Army revolver, specifically addressing claims made by Alec Baldwin regarding an incident on the 'Rust' movie set. Expert analysis from USCCA's Director of Content, Kevin Michalowski, explains how safety notches and the hammer's full-cock position require a deliberate trigger pull for discharge, refuting the idea of accidental firing without trigger manipulation. The demonstration emphasizes safe handling procedures and the internal workings of the firearm.

Quick Summary

Expert analysis of the Colt Single Action Army demonstrates that a properly functioning firearm requires a deliberate trigger pull to discharge. Safety notches on the hammer prevent accidental firing in partially cocked positions, refuting claims that the gun could fire without the trigger being pulled.

Chapters

  1. 00:00Introduction to Alec Baldwin Incident Analysis
  2. 00:15Firearm Identification: Colt Model P / SAA
  3. 01:18Safety Briefing and Test Setup
  4. 02:07Analyzing Alec Baldwin's Claims
  5. 03:25Mechanical Demonstration: Safety Notches
  6. 05:35Full Cock and Trigger Pull Test
  7. 06:33Conclusion on Mechanical Integrity

Frequently Asked Questions

Could the firearm used on the 'Rust' set have discharged without the trigger being pulled?

According to expert analysis of a Colt Single Action Army, a properly functioning firearm of this type requires a deliberate trigger pull to release the hammer and strike the primer. Safety notches also prevent accidental firing in certain hammer positions.

What firearm was demonstrated in the analysis of the Alec Baldwin incident?

The demonstration featured a Colt Model P, commonly known as the Single Action Army revolver. While a Pietta replica was used on the 'Rust' set, the video explains that the internal mechanical functions are identical.

How do the safety features of a Single Action Army revolver prevent accidental discharge?

Single Action Army revolvers have safety notches on the hammer. At positions like 1/8th cock or half-cock, the hammer is mechanically locked and cannot fire the primer, even if the trigger is manipulated or the hammer is released.

What is required to fire a Single Action Army revolver?

To fire a Single Action Army revolver, the hammer must be manually cocked to full cock. Then, a deliberate pull of the trigger is necessary to release the hammer, allowing it to strike the firing pin and ignite the primer.

Related News

All News →

More Training & Techniques Videos You Might Like

More from USCCA

View all →