The Safety of Single Action Revolvers! Proving the FBI is RIGHT!

Published on August 20, 2022
Duration: 8:44

This video explains the safety mechanisms of single-action revolvers, focusing on the interaction between the hammer notches and the sear. It clarifies that the firearm cannot be fired without pulling the trigger, debunking claims made in the context of the Alec Baldwin incident. The instructor details the 'safe position' and 'firing position' notches and explains how modern safety features like transfer bars further prevent accidental discharge.

Quick Summary

Single-action revolvers cannot fire without the trigger being pulled if they are functioning correctly. The hammer has distinct 'safe position' and 'firing position' notches that interact with the sear, preventing accidental discharge. Modern revolvers often include a transfer bar for enhanced safety.

Chapters

  1. 00:00Introduction & FBI Study Context
  2. 01:30Illustrating Hammer Notches & Sear
  3. 02:18Examining Notches on the Gun
  4. 03:31Hammer Drop Behavior Explained
  5. 04:16Ruger Vaquero vs. Traditional SAA
  6. 05:20Transfer Bar System Explained
  7. 06:35How a Malfunction Could Occur (Broken Sear)
  8. 07:10Defective Gun Scenario Analysis
  9. 08:24Conclusion: Gun Was Not Defective

Frequently Asked Questions

Can a single-action revolver fire without the trigger being pulled?

In a properly functioning single-action revolver, it cannot fire without the trigger being pulled. The hammer has safety notches that catch the sear, preventing it from falling forward unless the trigger is activated. A broken sear is the only likely mechanical defect that could cause this.

What is the 'safe position' on a single-action revolver?

The 'safe position' is a notch on the hammer that engages the sear when partially cocked. This allows the cylinder to rotate for loading but prevents the hammer from firing the gun. It's a critical safety feature for handling and loading.

How do modern single-action revolvers differ in safety from older models?

Many modern single-action revolvers incorporate a transfer bar system. This mechanism ensures the hammer cannot strike the firing pin unless the trigger is fully pulled, adding an extra layer of safety against accidental discharge compared to older designs.

What would indicate a single-action revolver is defective and could fire accidentally?

A significant defect, such as a broken sear, would prevent the hammer from catching on any safety notches. This would be a noticeable issue when cocking the hammer and would likely be discovered by authorities or gunsmiths during an investigation.

Related News

All News →

More Training & Techniques Videos You Might Like

More from TheYankeeMarshal

View all →