Webley Mk IV 1943

This guide, presented by Johnny Q, demonstrates how to check if a revolver's cylinder is functioning correctly. It highlights the importance of removing safety devices like plugs before operation and discusses the debate around the proper method for closing a revolver cylinder – gently or with a snap. The video emphasizes safe firearm handling throughout.

This guide details the operation of the Standard Manufacturing Thunderstruck Gen 3 double-action revolver. It covers the loading of .22 Magnum cartridges into its 8-round cylinder and the unique firing sequence where each trigger pull discharges two rounds simultaneously. The demonstration emphasizes safe firearm handling and proper loading techniques by an experienced shooter.

This video provides a practical demonstration of the Ruger Speed-Six revolver, focusing on its operation with .357 Magnum ammunition. The instructor, demonstrating high authority and expertise, walks through the loading process, live-fire engagement with attention to recoil, and the cylinder ejection technique. Key takeaways include safe handling practices and the DA/SA action of the firearm.

This video explains the fundamental differences between single-action and double-action revolvers, focusing on their trigger and hammer mechanisms. It demonstrates that single-action revolvers require manual cocking of the hammer for each shot, while double-action revolvers allow firing by either manually cocking the hammer or by pulling the trigger, which also cocks and releases the hammer. The instructor emphasizes the heavier trigger pull in double-action mode when not manually cocked and recommends cocking the hammer for a lighter, more accurate first shot.

This guide details a practical demonstration comparing the recoil characteristics of .38 Special and .357 Magnum ammunition fired from a Smith & Wesson Model 60 revolver. The video highlights significant differences in muzzle flip and felt energy, with the .357 Magnum producing substantially more recoil. It also visually explains the casing length difference and caliber compatibility. The instruction comes from an experienced shooter, emphasizing safe handling and practical understanding of ballistic differences.

This guide details the operation of the Smith & Wesson 32 Hand Ejector 3rd model, as demonstrated by Larry Potterfield. It covers understanding the 'hand ejector' mechanism, identifying key physical features, and performing single-action and double-action firing sequences. Proper safety precautions are emphasized throughout.

This guide details the process of loading the unique top-mounted magazine for the FN PS90 and preparing the firearm for firing. It covers magazine removal, horizontal cartridge loading, reinsertion, charging, and safety engagement, as demonstrated by a firearms enthusiast. The video also briefly showcases the integrated optic and live-fire performance with low recoil.

This guide details the firing and ejection process for the French Mle 1892 Lebel Revolver, as demonstrated by a firearms enthusiast. It covers safe loading of 8mm Lebel cartridges into the unique right-swinging cylinder and the subsequent ejection of spent casings using the integrated ejector rod. Proper handling and range safety are emphasized throughout.

This guide details the technique for firing the MP40 in full-auto, as demonstrated by an experienced shooter. It covers weapon overview, first-person firing, third-person range shooting, and slow-motion action sequences. The instruction emphasizes proper handling, recoil control during bursts, and reloading procedures.

This guide details the process of loading and firing the Mauser Kar98k using a 5-round stripper clip, as demonstrated by an experienced shooter. It covers the technique for efficient loading, safe handling, and effective bolt manipulation for follow-up shots, emphasizing proper sight alignment and consistent target engagement in various conditions.