15-23 Dodge Challenger Rear Pads & Rotors Replacement

This guide details the process of replacing front brake pads and rotors on a 2002-2006 Nissan Altima. It covers loosening lug nuts, removing the wheel, caliper, and old rotor, preparing the hub, installing new components, compressing the caliper piston, and reassembling everything. Specific torque specifications for caliper bracket bolts, caliper bolts, and lug nuts are provided, along with crucial safety warnings about supporting the vehicle and re-seating the brake pedal after the job is complete.

This guide details the process of replacing rear brake pads and rotors on a 2015-2020 Subaru WRX. It covers loosening lug nuts, removing the wheel and caliper, addressing the parking brake mechanism for rotor removal, compressing the caliper piston, installing new pads and rotors, and re-engaging the brake pedal. The video emphasizes proper torque specifications and safety precautions throughout the procedure.

This detailed guide from Buckeye Ballistics explains how to replace the rear brake pads and rotors on a 2010-2014 Ford Mustang, covering both V6 and GT models with slight hardware variations. The instructor emphasizes proper tool usage, safety precautions, and the importance of cleaning new rotors and lubricating slide pins. The guide also details the process of compressing the caliper piston, which can be a twist-type on some models, and the crucial step of re-seating the brake pedal after installation.

This guide details the front brake pad and rotor replacement process for 2015-2023 Dodge Challengers, specifically models with dual-piston front calipers, excluding Hellcat and Scat Pack trims. It covers removing the caliper and bracket, replacing the rotor, retracting caliper pistons, installing new pads, and reassembling the components with proper torque specifications. The video emphasizes the importance of correct lug nut torque to prevent rotor warping and advises on the proper procedure for re-seating brake pistons after the service.

This guide details the process of replacing rear brake pads and rotors on a 2002-2006 Nissan Altima. It covers removing the wheel, caliper, and bracket, then replacing the rotor and pads. Key steps include dealing with seized bolts, adjusting the emergency brake, compressing the caliper piston, and properly torquing components. The guide emphasizes safety and proper re-seating of the brake pedal after installation.

This guide details the process of replacing the front brake pads and rotors on a 2015 Buick LaCrosse 2.4L model. It covers loosening lug nuts, lifting the vehicle, removing the caliper and bracket, replacing pads and rotors, compressing the caliper piston, and reassembling the components. Specific torque values for caliper bracket bolts and lug nuts are provided, along with crucial advice on supporting the caliper and re-seating the brake pedal.

This video from Buckeye Ballistics provides a practical, albeit unconventional, comparison of five common pistol calibers (.22LR, .380 ACP, 9mm, .40 S&W, .45 ACP) by shooting watermelons. The expert demonstrates varying levels of terminal performance, from the .22LR's significant splitting to the .45 ACP's complete watermelon fragmentation, highlighting the differences in hydraulic shock and expansion. The test utilizes specific hollow-point ammunition, including Speer Gold Dot, Aguila Super Maximum, and Underwood XTP, showcasing their effects.

This video provides a practical, safety-conscious comparison of common pistol calibers (.22LR, .380 ACP, 9mm, .40 S&W, .45 ACP) against concrete blocks. The host, demonstrating high authority and expertise, details the testing methodology and results, emphasizing the risks of ricochet. None of the tested pistol calibers fully penetrated the concrete block's second wall, suggesting their limitations for certain penetration scenarios.

This review of the Taurus TX22 .22 LR pistol details its features, including a 16+1 capacity and excellent trigger. While initial testing with CCI Mini-Mags was flawless, subsequent tests with various ammunition types revealed cycling issues and culminated in a catastrophic failure. The failure was attributed to a squib load followed by a second shot, causing a barrel bulge and ruptured casing, highlighting potential ammunition inconsistencies. The review provides a detailed look at disassembly and damage assessment.

This video from Buckeye Ballistics provides an experimental comparison of three popular rimfire calibers: .22LR, .22WMR, and .17HMR, using cantaloupes as ballistic mediums. The host, an experienced shooter, demonstrates the distinct terminal ballistics of each round, highlighting how bullet construction and velocity affect target interaction. The comparison offers practical insights into the performance differences between these rimfire cartridges on soft tissue simulants.