98-03 Dodge Durango Front Wheel Bearing Hub How to Replace Removal and Install

This guide details the process of replacing the rear wheel bearing hub on a 2002-2006 Nissan Altima. It covers removing the caliper, rotor, and old hub, then installing the new hub and reassembling the brake components. The guide emphasizes using a slide hammer for stuck hubs and proper torque specifications for bolts and lug nuts. It also touches on e-brake adjustment and the difference for ABS models.

This guide details the process of replacing brake pads and rotors on a 2001 Dodge Durango. It covers loosening lug nuts, removing the wheel and caliper, compressing the piston, installing new pads and rotors, and reassembling the caliper. Proper torque sequences for lug nuts and a crucial pedal pumping procedure to seat the new brakes are emphasized. The video highlights the importance of not letting the caliper hang by the brake line and using grease on slide pins for optimal performance.

This guide details the replacement of the camshaft position sensor (CPS) on a 2001-2003 Dodge Durango with the 4.7L engine. The video emphasizes using OEM Mopar parts for reliability and recommends replacing both camshaft and crankshaft sensors simultaneously due to their interconnected function. It covers the process of accessing the sensor by removing the airbox, unbolting the old sensor, and installing the new one, highlighting the importance of fully seating the sensor for accurate readings. The presenter also discusses potential causes for the P1391 code, including wiring issues and timing chain problems.

This video from Buckeye Ballistics provides a practical, albeit unconventional, comparison of five common pistol calibers (.22LR, .380 ACP, 9mm, .40 S&W, .45 ACP) by shooting watermelons. The expert demonstrates varying levels of terminal performance, from the .22LR's significant splitting to the .45 ACP's complete watermelon fragmentation, highlighting the differences in hydraulic shock and expansion. The test utilizes specific hollow-point ammunition, including Speer Gold Dot, Aguila Super Maximum, and Underwood XTP, showcasing their effects.

This video provides a practical, safety-conscious comparison of common pistol calibers (.22LR, .380 ACP, 9mm, .40 S&W, .45 ACP) against concrete blocks. The host, demonstrating high authority and expertise, details the testing methodology and results, emphasizing the risks of ricochet. None of the tested pistol calibers fully penetrated the concrete block's second wall, suggesting their limitations for certain penetration scenarios.

This review of the Taurus TX22 .22 LR pistol details its features, including a 16+1 capacity and excellent trigger. While initial testing with CCI Mini-Mags was flawless, subsequent tests with various ammunition types revealed cycling issues and culminated in a catastrophic failure. The failure was attributed to a squib load followed by a second shot, causing a barrel bulge and ruptured casing, highlighting potential ammunition inconsistencies. The review provides a detailed look at disassembly and damage assessment.

This video from Buckeye Ballistics provides an experimental comparison of three popular rimfire calibers: .22LR, .22WMR, and .17HMR, using cantaloupes as ballistic mediums. The host, an experienced shooter, demonstrates the distinct terminal ballistics of each round, highlighting how bullet construction and velocity affect target interaction. The comparison offers practical insights into the performance differences between these rimfire cartridges on soft tissue simulants.